Nous acceptons la cryptomonnaie — les cryptos que vous détenez peuvent ainsi acheter du matériel réel.Payez en crypto, dépensez-la en matériel réel. Livraison assurée offerte partout dans le monde au-delà de 399 $. Cartons neutres, sans marque, expédiés depuis l’Allemagne.Livraison assurée offerte au-delà de 399 $. Votre taux est bloqué pendant 30 minutes dès l’ouverture de la caisse.Taux bloqué 30 minutes. Chaque article est scellé, son numéro de série est vérifié, et il est couvert par une garantie de 24 mois.Scellé, garanti 24 mois.

Articles suivis Se connecter
Two green DDR5 UDIMM sticks without heat spreaders in a 32GB kit

NEMIX RAM

NEMIX RAM 32GB (2x16GB) DDR5-5600 CL46 1.1V UDIMM Supermicro X13SAE-F memory upgrade

SKU CH-10JQ-SDXDE

A 32 GB DDR5 kit (2×16 GB) at 5600 MT/s, CL46, 1.1 V, 288-pin UDIMM validated for the Supermicro X13SAE-F motherboard

  • Capacity32GB (2 x 16GB)
  • Type288-Pin DDR5 UDIMM
  • SpeedDDR5 5600 (PC5 44800)
  • CAS LatencyCL46
  • Voltage1.10V
  • ECCNo

Size 32GB 2X16GB

  • 32 GB capacity in a matched 2 x 16 GB kit for full dual-channel bandwidth
  • DDR5-5600 speed at 1.10 V for efficient high-frequency operation
  • CL46 latency tuned to the Supermicro X13SAE-F memory controller
  • 288-pin UDIMM form factor fits the board's desktop DIMM slots exactly
  • Built with major OEM chips and tested for stability at rated specifications

Targeted DDR5 upgrade kit

This 32 GB kit contains two 16 GB DDR5 UDIMMs built for the Supermicro X13SAE-F motherboard. It is intended for desktop users who need a validated capacity increase on that specific platform.

CL46 timing at 5600 MT/s

The modules run at DDR5 5600 (PC5 44800) with a CAS latency of 46 at 1.1 V. That exact timing and voltage combination is what the board’s memory controller expects for stable operation at rated speed.

Straightforward DIMM installation

The 288 pin unbuffered non ECC sticks seat in the standard desktop slots without extra cables or drivers. Problems usually arise when the manual’s population order is ignored or when a mixing attempt introduces mismatched ranks or voltages.

Points forts

  • 32 GB capacity in a matched 2 x 16 GB kit for full dual-channel bandwidth
  • DDR5-5600 speed at 1.10 V for efficient high-frequency operation
  • CL46 latency tuned to the Supermicro X13SAE-F memory controller
  • 288-pin UDIMM form factor fits the board's desktop DIMM slots exactly
  • Built with major OEM chips and tested for stability at rated specifications

Caractéristiques

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-618K2
Capacity32GB (2 x 16GB)
Type288-Pin DDR5 UDIMM
SpeedDDR5 5600 (PC5 44800)
CAS LatencyCL46
Voltage1.10V
ECCNo
Buffered/RegisteredUnbuffered
Rank1Rx8
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
Compatible SystemSupermicro
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content32GB 2X16GB DDR5 5600MHz PC5-44800 1Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Autres versions de ce modèle

5 de plus dans cette gamme

Même famille, mémoire, ventirad ou fréquence différents — comparez avant de vous décider.

Questions sur cet article

Will the 5600 MT/s speed run at full rate on the Supermicro X13SAE-F board?

Yes, the kit is spec-matched to the X13SAE-F memory controller so it is recognised at the full DDR5-5600 data rate without manual tuning.

Does the PC5-44800 rating limit bandwidth on this motherboard?

PC5-44800 is the peak transfer rate for DDR5-5600; the X13SAE-F memory controller supports that rate, so the full bandwidth is available.

Will the 288-pin UDIMM modules fit the X13SAE-F DIMM slots?

Yes, the board uses standard 288-pin DDR5 UDIMM slots and the kit matches that exact form factor.

Également dans ce rayon

Les clients ont aussi comparé

Même rayon, même caisse — huit monnaies et un taux bloqué 30 minutes.