BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.0027634BTC
Laos
NEMIX RAM
NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 1.1V UDIMM Supermicro BH4SRG
A 64 GB DDR5 kit with two 32 GB modules running at 5600 MT/s, CL46, 1.1 V, unbuffered non-ECC, validated for Supermicro BH4SRG motherboards
- Capacity64GB (2 x 32GB)
- SpeedDDR5 5600 (PC5 44800)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity with two 32 GB modules
- DDR5 5600 speed rated at PC5-44800
- Low 1.1 V operating voltage for efficient power use
- CL46 CAS latency for responsive timing
- 288-pin UDIMM form factor fits Supermicro BH4SRG
System-specific DDR5 kit for Supermicro BH4SRG
This 64GB kit contains two 32GB DDR5 5600 UDIMMs validated for the Supermicro BH4SRG motherboard. Modules run at 1.10V with CL46 latency and a 2Rx8 organisation. The 288-pin unbuffered non-ECC design matches the board's native memory topology.
Builders who need registered
The kit is non-ECC and unbuffered, so it will not satisfy workloads that require error correction or registered signalling. Systems needing higher capacity per slot or lower latency timings will require a different specification.
Sustained operation at rated speed and voltage
Each module operates continuously at 5600 MT/s and 1.10V without a heat spreader, relying on case airflow for thermal management. The 2Rx8 density maintains stable throughput during extended compute sessions on the validated platform.
Põhijooned
- 64 GB total capacity with two 32 GB modules
- DDR5 5600 speed rated at PC5-44800
- Low 1.1 V operating voltage for efficient power use
- CL46 CAS latency for responsive timing
- 288-pin UDIMM form factor fits Supermicro BH4SRG
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | NEMIX RAM Original Series Memory |
| Model | DDR5 Non-ECC Unbuffered UDIMM Memory |
| Part Number | MD44800-328K2 |
| Capacity | 64GB (2 x 32GB) |
| Speed | DDR5 5600 (PC5 44800) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Supermicro |
| CAS Latency | CL46 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 2Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (2 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT |
Küsimused selle toote kohta
Does my Supermicro BH4SRG need to support DDR5 5600 and 1.10 V for this kit to work?
Yes, the motherboard must accept DDR5 5600 at 1.10 V; the kit is built to that speed and voltage.
Can I run this 2Rx8 DDR5 5600 kit with other DDR5 modules already installed?
Mixing ranks and speeds is possible but the system will run all modules at the lowest common speed and voltage; matching kits is recommended for stability.
How can I confirm the kit is running at DDR5 5600 CL46 after installation?
Check the memory speed and timings in BIOS or a tool like CPU-Z; they should show 5600 MT/s and CL46 when the kit is operating correctly.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
