Accettiamo criptovalute — così le crypto che Lei possiede possono comprare hardware reale.Paghi in crypto, la spenda in hardware reale. Spedizione assicurata gratuita in tutto il mondo oltre i 399 $. Cartoni neutri, senza marchio, spediti dalla Germania.Spedizione assicurata gratuita oltre i 399 $. Il Suo tasso resta bloccato per 30 minuti dall’apertura del checkout.Tasso bloccato 30 minuti. Ogni articolo è sigillato, il numero di serie è verificato, ed è coperto da una garanzia di 24 mesi.Sigillato, garantito 24 mesi.

Articoli preferiti Accedi
Two green DDR5 UDIMM sticks without heat spreaders, 64GB kit

NEMIX RAM

NEMIX RAM 64GB (2x32GB) DDR5 5600 CL46 1.1V UDIMM Supermicro BH4SRG

SKU CH-2RWT-FJHN4

A 64 GB DDR5 kit with two 32 GB modules running at 5600 MT/s, CL46, 1.1 V, unbuffered non-ECC, validated for Supermicro BH4SRG motherboards

  • Capacity64GB (2 x 32GB)
  • SpeedDDR5 5600 (PC5 44800)
  • ECCNo
  • Buffered/RegisteredUnbuffered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity with two 32 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • Low 1.1 V operating voltage for efficient power use
  • CL46 CAS latency for responsive timing
  • 288-pin UDIMM form factor fits Supermicro BH4SRG

System-specific DDR5 kit for Supermicro BH4SRG

This 64GB kit contains two 32GB DDR5 5600 UDIMMs validated for the Supermicro BH4SRG motherboard. Modules run at 1.10V with CL46 latency and a 2Rx8 organisation. The 288-pin unbuffered non-ECC design matches the board's native memory topology.

Builders who need registered

The kit is non-ECC and unbuffered, so it will not satisfy workloads that require error correction or registered signalling. Systems needing higher capacity per slot or lower latency timings will require a different specification.

Sustained operation at rated speed and voltage

Each module operates continuously at 5600 MT/s and 1.10V without a heat spreader, relying on case airflow for thermal management. The 2Rx8 density maintains stable throughput during extended compute sessions on the validated platform.

Punti di forza

  • 64 GB total capacity with two 32 GB modules
  • DDR5 5600 speed rated at PC5-44800
  • Low 1.1 V operating voltage for efficient power use
  • CL46 CAS latency for responsive timing
  • 288-pin UDIMM form factor fits Supermicro BH4SRG

Caratteristiche tecniche

BrandNEMIX RAM
SeriesNEMIX RAM Original Series Memory
ModelDDR5 Non-ECC Unbuffered UDIMM Memory
Part NumberMD44800-328K2
Capacity64GB (2 x 32GB)
SpeedDDR5 5600 (PC5 44800)
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemSupermicro
CAS LatencyCL46
Heat SpreaderNo
Type288-Pin DDR5 UDIMM
Rank2Rx8
FeaturesDDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible
Package Content64GB (2 x 32GB) DDR5 5600MHz PC5-44800 2Rx8 1.1V 288-PIN Non-ECC UDIMM KIT

Domande su questo articolo

Does my Supermicro BH4SRG need to support DDR5 5600 and 1.10 V for this kit to work?

Yes, the motherboard must accept DDR5 5600 at 1.10 V; the kit is built to that speed and voltage.

Can I run this 2Rx8 DDR5 5600 kit with other DDR5 modules already installed?

Mixing ranks and speeds is possible but the system will run all modules at the lowest common speed and voltage; matching kits is recommended for stability.

How can I confirm the kit is running at DDR5 5600 CL46 after installation?

Check the memory speed and timings in BIOS or a tool like CPU-Z; they should show 5600 MT/s and CL46 when the kit is operating correctly.

Anche in questo reparto

Anche i clienti hanno confrontato questi

Stesso reparto, stessa cassa — otto monete e un cambio bloccato per 30 minuti.