BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277053BTC
Laos
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 1.1V ECC RDIMM Cisco UCS X410c M7 memory upgrade
A 64 GB registered DDR5 kit of four 16 GB ECC modules at 4800 MT/s and CL40 for the Cisco UCS X410c M7
- Capacity64GB (4 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCYes
- Buffered/RegisteredRegistered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB total capacity from four 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered RDIMM for server-grade data integrity
- Low 1.10 V operation reduces power draw
- Validated for Cisco UCS X410c M7 compute nodes
Cisco UCS X410c M7 DDR5 memory kit
This 64 GB kit contains four 16 GB DDR5 registered DIMMs built for the Cisco UCS X410c M7 compute node. Each module runs at 4800 MT/s with CL40 latency at 1.1 V. ECC and registered signalling protect data integrity in multi-socket server workloads.
Suited for administrators expanding X410c M7
The kit matches the node's DDR5 RDIMM slots and registered architecture. Buyers needing unbuffered UDIMMs, non-ECC memory or a different form factor should look elsewhere. Systems that require speeds above 4800 MT/s or lower CAS latency will not be satisfied by this configuration.
4800 MT/s DDR5 RDIMM with CL40 at 1.1 V
The rated speed and latency define whether the modules meet the platform's qualified memory list. Verify the compute node's supported memory population rules before ordering. The 288-pin registered design only fits slots wired for DDR5 RDIMMs.
Põhijooned
- 64 GB total capacity from four 16 GB modules
- DDR5 4800 speed rated at PC5-38400 bandwidth
- ECC registered RDIMM for server-grade data integrity
- Low 1.10 V operation reduces power draw
- Validated for Cisco UCS X410c M7 compute nodes
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | Cisco Server Compatible Series Memory |
| Model | Cisco DDR5 4800MHZ ECC RDIMM Registered Server Memory |
| Part Number | MR38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | Yes |
| Buffered/Registered | Registered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | Cisco |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 RDIMM |
| Rank | 1Rx8 |
| Features | DDR5 ECC Registered RDIMM Server Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT |
Küsimused selle toote kohta
Does the 288-pin DDR5 RDIMM fit the Cisco UCS X410c M7 compute node?
Yes, the kit is built as a 288-pin DDR5 RDIMM that matches the Cisco UCS X410c M7 memory slots.
What is the correct installation sequence for the four 16 GB modules?
Populate all four slots in the order shown in the Cisco UCS X410c M7 service guide; the common mistake is leaving a slot empty or mixing ranks.
When should the registered ECC modules be replaced?
Replace a module if the system logs uncorrectable ECC errors or if memory diagnostics report a failure on any of the four 16 GB sticks.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
