We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Four green DDR5 RDIMM modules with black chips and gold contacts

NEMIX RAM

NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 1.1V ECC RDIMM Cisco UCS X410c M7 memory upgrade

SKU CH-NHP4-ERVNJ

A 64 GB registered DDR5 kit of four 16 GB ECC modules at 4800 MT/s and CL40 for the Cisco UCS X410c M7

  • Capacity64GB (4 x 16GB)
  • SpeedDDR5 4800 (PC5 38400)
  • ECCYes
  • Buffered/RegisteredRegistered
  • ChipsetMajor OEM Samsung, Micron, Hynix
  • Voltage1.10V
  • 64 GB total capacity from four 16 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM for server-grade data integrity
  • Low 1.10 V operation reduces power draw
  • Validated for Cisco UCS X410c M7 compute nodes

Cisco UCS X410c M7 DDR5 memory kit

This 64 GB kit contains four 16 GB DDR5 registered DIMMs built for the Cisco UCS X410c M7 compute node. Each module runs at 4800 MT/s with CL40 latency at 1.1 V. ECC and registered signalling protect data integrity in multi-socket server workloads.

Suited for administrators expanding X410c M7

The kit matches the node's DDR5 RDIMM slots and registered architecture. Buyers needing unbuffered UDIMMs, non-ECC memory or a different form factor should look elsewhere. Systems that require speeds above 4800 MT/s or lower CAS latency will not be satisfied by this configuration.

4800 MT/s DDR5 RDIMM with CL40 at 1.1 V

The rated speed and latency define whether the modules meet the platform's qualified memory list. Verify the compute node's supported memory population rules before ordering. The 288-pin registered design only fits slots wired for DDR5 RDIMMs.

Highlights

  • 64 GB total capacity from four 16 GB modules
  • DDR5 4800 speed rated at PC5-38400 bandwidth
  • ECC registered RDIMM for server-grade data integrity
  • Low 1.10 V operation reduces power draw
  • Validated for Cisco UCS X410c M7 compute nodes

Specifications

BrandNEMIX RAM
SeriesCisco Server Compatible Series Memory
ModelCisco DDR5 4800MHZ ECC RDIMM Registered Server Memory
Part NumberMR38400-618K4
Capacity64GB (4 x 16GB)
SpeedDDR5 4800 (PC5 38400)
ECCYes
Buffered/RegisteredRegistered
ChipsetMajor OEM Samsung, Micron, Hynix
Voltage1.10V
Compatible SystemCisco
CAS LatencyCL40
Heat SpreaderNo
Type288-Pin DDR5 RDIMM
Rank1Rx8
FeaturesDDR5 ECC Registered RDIMM Server Motherboard Compatible
Package Content64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN ECC RDIMM Registered Server Memory KIT

Questions about this item

Does the 288-pin DDR5 RDIMM fit the Cisco UCS X410c M7 compute node?

Yes, the kit is built as a 288-pin DDR5 RDIMM that matches the Cisco UCS X410c M7 memory slots.

What is the correct installation sequence for the four 16 GB modules?

Populate all four slots in the order shown in the Cisco UCS X410c M7 service guide; the common mistake is leaving a slot empty or mixing ranks.

When should the registered ECC modules be replaced?

Replace a module if the system logs uncorrectable ECC errors or if memory diagnostics report a failure on any of the four 16 GB sticks.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.