BFKK
BFKK 3U Rackmount Server Chassis EATX/ATX/MATX 4x5.25 6x3.5 Top/Side Cooling
- Rackmount
214,99 $
0.00277478BTC
Laos
NEMIX RAM
NEMIX RAM 64GB (4x16GB) DDR5 4800 CL40 1.1V UDIMM HP Z2 G9 Tower Workstation memory upgrade
A 64 GB kit of four 16 GB DDR5 4800 CL40 UDIMM modules at 1.1 V for the HP Z2 G9 Tower Workstation
- Capacity64GB (4 x 16GB)
- SpeedDDR5 4800 (PC5 38400)
- ECCNo
- Buffered/RegisteredUnbuffered
- ChipsetMajor OEM Samsung, Micron, Hynix
- Voltage1.10V
- 64 GB kit expands workstation memory for heavy workloads
- Four 16 GB modules fill four slots in matched configuration
- DDR5 4800 speed delivers high data throughput for demanding applications
- 1 V operation reduces power draw and heat output
- Validated for HP Z2 G9 Tower Workstation compatibility
HP Z2 G9 Tower Workstation compatible DDR5 kit
This 64GB kit contains four 16GB DDR5 4800 UDIMM modules built for the HP Z2 G9 Tower Workstation. It targets IT professionals and workstation owners who need a validated memory upgrade for that specific platform.
1.1V operation with no heat spreader
The modules run at 1.10V without a heat spreader, relying on the workstation's internal airflow for cooling. Unbuffered non-ECC DDR5 at CL40 keeps power draw low and acoustic impact negligible in normal workloads.
Lifetime replacement warranty
Every module is stress tested under load before shipping and covered by a lifetime replacement warranty. US-based IT support staff are available to assist with installation or compatibility questions.
Põhijooned
- 64 GB kit expands workstation memory for heavy workloads
- Four 16 GB modules fill four slots in matched configuration
- DDR5 4800 speed delivers high data throughput for demanding applications
- 1 V operation reduces power draw and heat output
- Validated for HP Z2 G9 Tower Workstation compatibility
Tehnilised andmed
| Brand | NEMIX RAM |
|---|---|
| Series | HPE Server/Workstation Compatible Series Memory |
| Model | HPE DDR5 4800MHZ Non-ECC Unbuffered UDIMM |
| Part Number | MD38400-618K4 |
| Capacity | 64GB (4 x 16GB) |
| Speed | DDR5 4800 (PC5 38400) |
| ECC | No |
| Buffered/Registered | Unbuffered |
| Chipset | Major OEM Samsung, Micron, Hynix |
| Voltage | 1.10V |
| Compatible System | HPE |
| CAS Latency | CL40 |
| Heat Spreader | No |
| Type | 288-Pin DDR5 UDIMM |
| Rank | 1Rx8 |
| Features | DDR5 Non-ECC Unbuffered UDIMM Motherboard Compatible |
| Package Content | 64GB (4X16GB) DDR5 4800MHZ PC5-38400 1Rx8 1.1V CL40 288-PIN Non-ECC Unbuffered UDIMM KIT |
Küsimused selle toote kohta
How do I install the 288-pin DDR5 UDIMM modules in my HP Z2 G9 Tower Workstation, and which step is most often missed?
Power off and unplug the workstation, open the chassis, align each module's notch with the slot key, press down firmly until the retention clips click on both sides, then verify all four 16 GB sticks are fully seated before closing the case.
What maintenance or replacement will this 64 GB DDR5 4800 kit need over its service life?
No scheduled maintenance is required; the modules have no heat spreader and run at 1.1 V, so only replace a stick if diagnostics report a memory error, which is covered by the lifetime replacement warranty.
What limit appears first when the four 1Rx8 modules run sustained workloads at CL40?
The CAS latency of 40 cycles at 4800 MT/s sets the baseline response time; under continuous load the memory controller's thermal throttle point will be reached before the modules themselves become a bottleneck.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
