Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Four green DDR3 UDIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 8GB (4x2GB) DDR3 1333 desktop RAM

SKU CH-ZFD7-ZD9YH

A kit of four 2 GB DDR3 modules running at 1333 MHz with CL9 timing at 1.5 V for desktop upgrades

  • Capacity8GB (4 x 2GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 8GB (4 x 2GB)

  • 8 GB total capacity from four 2 GB modules
  • DDR3 1333 speed rated at PC3 10600 bandwidth
  • CL9 latency at standard 1.50 V operation
  • 240-pin unbuffered non-ECC UDIMM form factor
  • Built with major OEM Samsung, Micron or Hynix chips

8GB DDR3 1333 Kit for Desktop Upgrades

This kit provides 8 GB of DDR3 memory across four 2 GB modules. It suits owners of older desktop systems that use 240-pin UDIMM slots and need a straightforward capacity increase. The CL9 latency and 1.5 V operation match the PC3-10600 specification for broad motherboard compatibility.

DDR3 1333 Interface Limits

DDR3 1333 caps transfer rates at the PC3-10600 level, so bandwidth is fixed by the memory controller and chipset of the host platform. The four-module population fills all slots on many dual-channel boards, leaving no room for further expansion without removing existing sticks. Voltage is set at 1.50 V with no XMP or manual overclocking profiles provided.

Unbuffered Non-ECC Build with Major-Brand Chips

Modules use unbuffered, non-ECC chips sourced from Samsung, Micron or Hynix depending on supply. No heat spreader is fitted, keeping the profile low for tight clearances around large CPU coolers. Standard 240-pin gold contacts ensure reliable seating in desktop DIMM sockets for everyday office or legacy gaming workloads.

Põhijooned

  • 8 GB total capacity from four 2 GB modules
  • DDR3 1333 speed rated at PC3 10600 bandwidth
  • CL9 latency at standard 1.50 V operation
  • 240-pin unbuffered non-ECC UDIMM form factor
  • Built with major OEM Samsung, Micron or Hynix chips

Tehnilised andmed

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD10600-228K4
Capacity8GB (4 x 2GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Should I choose the 4×2 GB kit or a different capacity for my desktop?

The kit provides 8 GB total across four 2 GB modules, so it fills four DDR3 slots; select it when your board has four slots and you want 8 GB without mixing module sizes.

What does the 1333 MHz rating mean once the memory is installed?

The modules run at DDR3 1333 (PC3-10600) with CL9 latency at 1.5 V, delivering that speed when the motherboard supports the same frequency and timing.

Does the 240-pin DDR3 interface limit the bandwidth in practice?

The 240-pin DDR3 UDIMM interface caps transfer rates at the PC3-10600 level, so bandwidth cannot exceed the 1333 MHz specification of these modules.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.