Vi tar imot kryptovaluta — slik kan kryptovalutaene du eier, kjøpe ekte maskinvare.Betal med krypto, bruk den på ekte maskinvare. Gratis, forsikret levering verden over for bestillinger over 399 $. Nøytrale kartonger uten merking, sendt fra Tyskland.Gratis, forsikret levering over 399 $. Kursen din er låst i 30 minutter når kassen åpnes.Kurs låst i 30 minutter. Alle varer er forseglet, serienummerkontrollert og dekket av 24 måneders garanti.Forseglet, 24 måneders garanti.

Overvåkingsliste Logg inn
Four green DDR3 UDIMM sticks with black chips, no heat spreaders

NEMIX RAM

NEMIX RAM 8GB (4x2GB) DDR3 1333 desktop RAM

SKU CH-ZFD7-ZD9YH

A kit of four 2 GB DDR3 modules running at 1333 MHz with CL9 timing at 1.5 V for desktop upgrades

  • Capacity8GB (4 x 2GB)
  • Type240-Pin DDR3 UDIMM
  • SpeedDDR3 1333 (PC3 10600)
  • CAS LatencyCL9
  • Voltage1.50V
  • ECCNo

Capacity 8GB (4 x 2GB)

  • 8 GB total capacity from four 2 GB modules
  • DDR3 1333 speed rated at PC3 10600 bandwidth
  • CL9 latency at standard 1.50 V operation
  • 240-pin unbuffered non-ECC UDIMM form factor
  • Built with major OEM Samsung, Micron or Hynix chips

8GB DDR3 1333 Kit for Desktop Upgrades

This kit provides 8 GB of DDR3 memory across four 2 GB modules. It suits owners of older desktop systems that use 240-pin UDIMM slots and need a straightforward capacity increase. The CL9 latency and 1.5 V operation match the PC3-10600 specification for broad motherboard compatibility.

DDR3 1333 Interface Limits

DDR3 1333 caps transfer rates at the PC3-10600 level, so bandwidth is fixed by the memory controller and chipset of the host platform. The four-module population fills all slots on many dual-channel boards, leaving no room for further expansion without removing existing sticks. Voltage is set at 1.50 V with no XMP or manual overclocking profiles provided.

Unbuffered Non-ECC Build with Major-Brand Chips

Modules use unbuffered, non-ECC chips sourced from Samsung, Micron or Hynix depending on supply. No heat spreader is fitted, keeping the profile low for tight clearances around large CPU coolers. Standard 240-pin gold contacts ensure reliable seating in desktop DIMM sockets for everyday office or legacy gaming workloads.

Høydepunkter

  • 8 GB total capacity from four 2 GB modules
  • DDR3 1333 speed rated at PC3 10600 bandwidth
  • CL9 latency at standard 1.50 V operation
  • 240-pin unbuffered non-ECC UDIMM form factor
  • Built with major OEM Samsung, Micron or Hynix chips

Spesifikasjoner

BrandNEMIX RAM
SeriesNEMIX RAM DDR3 Orignial Desktop PC 240-Pin Non-ECC Unbuffered UDIMM Memory
ModelOriginal Series DDR3 Desktop PC Memory Solutions
Part NumberMD10600-228K4
Capacity8GB (4 x 2GB)
Type240-Pin DDR3 UDIMM
SpeedDDR3 1333 (PC3 10600)
CAS LatencyCL9
Voltage1.50V
ECCNo
Buffered/RegisteredUnbuffered
ChipsetMajor OEM Samsung, Micron, Hynix
Heat SpreaderNo
FeaturesDDR3 Non-ECC Unbuffered UDIMM Motherboard Compatible
LED ColorNone

Andre versjoner av denne modellen

5 flere i samme serie

Samme familie, annet minne, annen kjøler eller klokkefrekvens — sammenlign før du bestemmer deg.

Spørsmål om denne varen

Should I choose the 4×2 GB kit or a different capacity for my desktop?

The kit provides 8 GB total across four 2 GB modules, so it fills four DDR3 slots; select it when your board has four slots and you want 8 GB without mixing module sizes.

What does the 1333 MHz rating mean once the memory is installed?

The modules run at DDR3 1333 (PC3-10600) with CL9 latency at 1.5 V, delivering that speed when the motherboard supports the same frequency and timing.

Does the 240-pin DDR3 interface limit the bandwidth in practice?

The 240-pin DDR3 UDIMM interface caps transfer rates at the PC3-10600 level, so bandwidth cannot exceed the 1333 MHz specification of these modules.

Også i denne avdelingen

Kunder sammenlignet disse

Samme hylle, samme kasse — åtte mynter og 30 minutters kurslås.