Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

Orico

Orico 0.5m USB 3.0 to SATA 2.5in hard drive adapter cable

SKU CH-GAAE-MW77R MPN 0.5m

Connects a 2.5in SATA drive via USB 3.0 with UASP for up to 480M/s speeds, includes a Type-C 5V power port for larger drives, and works driver-free on Windows, Linux, Mac and Android

  • Changer TypeUSB 3.0 to SATA

Model 0.5m

Option 2.5in HDD/SSD

  • Connect 2.5in SATA drives via USB 3.0
  • UASP protocol enables up to 5Gbps transfer speed
  • Type-C 5V power port supports drives up to 6TB
  • Plug-and-play on Windows, Linux, macOS and Android
  • Compact 0.5m cable keeps desk space tidy

USB 3.0 to SATA 2.5in adapter

This Orico cable connects a 2.5in SATA hard drive or SSD to a USB 3.0 port on a laptop, desktop or tablet. It is built for quick data recovery, drive cloning or temporary external storage without opening a case. The 0.5m length keeps the cable tidy on a desk.

Suits drive-free access on Windows, Linux.

It works immediately with no driver installation, so technicians and home users can swap drives in seconds. The reserved Type-C 5V power port lets the adapter run drives up to 6TB without an extra power brick. Builders who need a 3.5in drive bay or internal mounting should look at something else.

UASP protocol on USB 3.0 to SATA 3.0

The cable supports UASP on the USB 3.0 to SATA 3.0 link, delivering a tested transfer rate of 480M/s. That bandwidth handles large file moves and backups efficiently. If your workflow needs a different interface or higher sustained throughput, this adapter will not meet that requirement.

Põhijooned

  • Connect 2.5in SATA drives via USB 3.0
  • UASP protocol enables up to 5Gbps transfer speed
  • Type-C 5V power port supports drives up to 6TB
  • Plug-and-play on Windows, Linux, macOS and Android
  • Compact 0.5m cable keeps desk space tidy

Tehnilised andmed

Changer TypeUSB 3.0 to SATA

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Do I need a separate power supply to run a 2.5in SATA drive with this adapter?

The cable includes a reserved Type-C 5V power port that can supply enough current for drives up to 6TB, so most 2.5in SSDs or HDDs will run without an extra brick.

Will this USB 3.0 to SATA cable work with an older SATA II drive I already own?

Yes, the SATA 3.0 interface is backward compatible with SATA II and SATA I drives, so your existing drive will connect and transfer at its native speed.

How can I verify the adapter is delivering the advertised 480M/s transfer rate after I plug it in?

Run a sequential read benchmark such as CrystalDiskMark or hdparm on the connected drive; a result near 480 MB/s confirms the UASP-enabled USB 3.0 link is operating at full speed.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.