Prijímame kryptomeny — takže mince, ktoré držíte, môžete zameniť za skutočný hardvér.Plaťte v krypte, miňte ho na skutočný hardvér. Poistená doprava zadarmo po celom svete nad 399 $. Neutrálne kartóny bez potlače, odosielané z Nemecka.Poistená doprava zadarmo nad 399 $. Váš kurz je zablokovaný na 30 minút hneď po otvorení pokladne.Kurz zablokovaný na 30 minút. Každý produkt je zapečatený, jeho sériové číslo je overené a vzťahuje sa naň 24-mesačná záruka.Zapečatené, 24-mesačná záruka.

Sledované položky Prihlásiť sa
Short black USB 3.0 to SATA adapter cable with Type-C power port for 2.5in drives

Orico

Orico 0.5m USB 3.0 to SATA 2.5in hard drive adapter cable

SKU CH-GAAE-MW77R MPN 0.5m

Connects a 2.5in SATA drive via USB 3.0 with UASP for up to 480M/s speeds, includes a Type-C 5V power port for larger drives, and works driver-free on Windows, Linux, Mac and Android

  • Changer TypeUSB 3.0 to SATA

Model 0.5m

Option 2.5in HDD/SSD

  • Connect 2.5in SATA drives via USB 3.0
  • UASP protocol enables up to 5Gbps transfer speed
  • Type-C 5V power port supports drives up to 6TB
  • Plug-and-play on Windows, Linux, macOS and Android
  • Compact 0.5m cable keeps desk space tidy

USB 3.0 to SATA 2.5in adapter

This Orico cable connects a 2.5in SATA hard drive or SSD to a USB 3.0 port on a laptop, desktop or tablet. It is built for quick data recovery, drive cloning or temporary external storage without opening a case. The 0.5m length keeps the cable tidy on a desk.

Suits drive-free access on Windows, Linux.

It works immediately with no driver installation, so technicians and home users can swap drives in seconds. The reserved Type-C 5V power port lets the adapter run drives up to 6TB without an extra power brick. Builders who need a 3.5in drive bay or internal mounting should look at something else.

UASP protocol on USB 3.0 to SATA 3.0

The cable supports UASP on the USB 3.0 to SATA 3.0 link, delivering a tested transfer rate of 480M/s. That bandwidth handles large file moves and backups efficiently. If your workflow needs a different interface or higher sustained throughput, this adapter will not meet that requirement.

Prednosti

  • Connect 2.5in SATA drives via USB 3.0
  • UASP protocol enables up to 5Gbps transfer speed
  • Type-C 5V power port supports drives up to 6TB
  • Plug-and-play on Windows, Linux, macOS and Android
  • Compact 0.5m cable keeps desk space tidy

Špecifikácie

Changer TypeUSB 3.0 to SATA

Ďalšie verzie tohto modelu

Ďalších 5 v tomto rade

Rovnaký rad, iná pamäť, chladič alebo frekvencia — porovnajte pred rozhodnutím.

Otázky k tomuto produktu

Do I need a separate power supply to run a 2.5in SATA drive with this adapter?

The cable includes a reserved Type-C 5V power port that can supply enough current for drives up to 6TB, so most 2.5in SSDs or HDDs will run without an extra brick.

Will this USB 3.0 to SATA cable work with an older SATA II drive I already own?

Yes, the SATA 3.0 interface is backward compatible with SATA II and SATA I drives, so your existing drive will connect and transfer at its native speed.

How can I verify the adapter is delivering the advertised 480M/s transfer rate after I plug it in?

Run a sequential read benchmark such as CrystalDiskMark or hdparm on the connected drive; a result near 480 MB/s confirms the UASP-enabled USB 3.0 link is operating at full speed.

Aj v tomto oddelení

Zákazníci tiež porovnávali

Rovnaké oddelenie, rovnaká pokladňa — osem mien a kurz zablokovaný na 30 minút.