SanDisk
SanDisk Cruzer Blade 8 GB USB 2.0 USB flash drive Black SDCZ50-008G-B35
391,99 $
0.00497904BTC
Laos
OWC
OWC 16GB DDR4 2666 ECC VLP UDIMM 2Rx8 CL19 1.2V Supermicro MicroBlade 6119G-C2 6119G-C4 6119G-T4
A 16 GB DDR4 2666 ECC VLP UDIMM module validated for Supermicro MicroBlade 6119G series servers
- Capacity16GB
- Type288-Pin DDR4 ECC VLP UDIMM
- SpeedDDR4 2666 (PC4 21300)
- CAS LatencyCL19
- Voltage1.2V
- ECCYes
- 16 GB capacity expands multitasking headroom for demanding workloads
- DDR4 2666 speed matches platform spec for stable operation
- ECC protection detects and corrects single-bit errors automatically
- Very low profile 288-pin design fits dense MicroBlade chassis
- 2 V JEDEC standard voltage keeps power draw low
OWC 16GB DDR4 ECC VLP UDIMM
This 16GB DDR4 2666 module is built for the Supermicro MicroBlade 6119G-C2, 6119G-C4 and 6119G-T4. It also fits the Supermicro X11SCM-F and X11SCM-LN8F motherboards. The stick runs at 1.2V with CL19 latency and uses a 2Rx8 unbuffered design.
Who this suits and who it does not
IT teams expanding blade-server memory will appreciate the JEDEC-standard, ROHS-compliant build. Buyers needing registered or load-reduced DIMMs cannot use this unbuffered part. Systems limited to lower capacities or different pin counts should look elsewhere.
Capacity and headroom
A single 16GB rank adds meaningful headroom for virtualisation workloads and multi-application sessions. The 2666 MT/s rate handles typical server duties, though bandwidth-heavy tasks may saturate the bus before capacity runs out.
Põhijooned
- 16 GB capacity expands multitasking headroom for demanding workloads
- DDR4 2666 speed matches platform spec for stable operation
- ECC protection detects and corrects single-bit errors automatically
- Very low profile 288-pin design fits dense MicroBlade chassis
- 2 V JEDEC standard voltage keeps power draw low
Tehnilised andmed
| Brand | OWC |
|---|---|
| Part Number | 2E6V42R816GB |
| Capacity | 16GB |
| Type | 288-Pin DDR4 ECC VLP UDIMM |
| Speed | DDR4 2666 (PC4 21300) |
| CAS Latency | CL19 |
| Voltage | 1.2V |
| ECC | Yes |
| Buffered/Registered | Unbuffered |
| Rank | 2Rx8 |
| Heat Spreader | No |
| Compatible System | Supermicro MicroBlade 6119G-C2 Supermicro MicroBlade 6119G-C4 Supermicro MicroBlade 6119G-T4 Supermicro Motherboard X11SCM-F Supermicro Motherboard X11SCM-LN8F |
Küsimused selle toote kohta
Will this module work in my Supermicro MicroBlade 6119G-C2 without any other hardware changes?
Yes, it is a single 16GB DDR4 2666 ECC VLP UDIMM that fits the 288-pin slots of the 6119G-C2, 6119G-C4 and 6119G-T4 and runs at 1.2V.
Can I keep my existing DDR4 2666 ECC UDIMMs and add this OWC stick alongside them?
It will operate at DDR4 2666 CL19 1.2V; for best stability OWC recommends matching capacity, speed, rank (2Rx8) and manufacturer across all populated slots.
How can I verify the module is running at the rated 2666 MT/s with ECC active after installation?
Check the BIOS memory information or use a tool such as dmidecode to confirm speed shows 2666 MT/s, voltage 1.2V and ECC type reported as enabled.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
