نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with gold edge connectors and black memory chips low profile design

OWC

OWC 16GB DDR4 2666 ECC VLP UDIMM 2Rx8 CL19 1.2V Supermicro MicroBlade 6119G-C2 6119G-C4 6119G-T4

SKU CH-QZGJ-GFB4Z

A 16 GB DDR4 2666 ECC VLP UDIMM module validated for Supermicro MicroBlade 6119G series servers

  • Capacity16GB
  • Type288-Pin DDR4 ECC VLP UDIMM
  • SpeedDDR4 2666 (PC4 21300)
  • CAS LatencyCL19
  • Voltage1.2V
  • ECCYes
  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR4 2666 speed matches platform spec for stable operation
  • ECC protection detects and corrects single-bit errors automatically
  • Very low profile 288-pin design fits dense MicroBlade chassis
  • 2 V JEDEC standard voltage keeps power draw low

OWC 16GB DDR4 ECC VLP UDIMM

This 16GB DDR4 2666 module is built for the Supermicro MicroBlade 6119G-C2, 6119G-C4 and 6119G-T4. It also fits the Supermicro X11SCM-F and X11SCM-LN8F motherboards. The stick runs at 1.2V with CL19 latency and uses a 2Rx8 unbuffered design.

Who this suits and who it does not

IT teams expanding blade-server memory will appreciate the JEDEC-standard, ROHS-compliant build. Buyers needing registered or load-reduced DIMMs cannot use this unbuffered part. Systems limited to lower capacities or different pin counts should look elsewhere.

Capacity and headroom

A single 16GB rank adds meaningful headroom for virtualisation workloads and multi-application sessions. The 2666 MT/s rate handles typical server duties, though bandwidth-heavy tasks may saturate the bus before capacity runs out.

أبرز المميزات

  • 16 GB capacity expands multitasking headroom for demanding workloads
  • DDR4 2666 speed matches platform spec for stable operation
  • ECC protection detects and corrects single-bit errors automatically
  • Very low profile 288-pin design fits dense MicroBlade chassis
  • 2 V JEDEC standard voltage keeps power draw low

المواصفات

BrandOWC
Part Number2E6V42R816GB
Capacity16GB
Type288-Pin DDR4 ECC VLP UDIMM
SpeedDDR4 2666 (PC4 21300)
CAS LatencyCL19
Voltage1.2V
ECCYes
Buffered/RegisteredUnbuffered
Rank2Rx8
Heat SpreaderNo
Compatible SystemSupermicro MicroBlade 6119G-C2
Supermicro MicroBlade 6119G-C4
Supermicro MicroBlade 6119G-T4
Supermicro Motherboard X11SCM-F
Supermicro Motherboard X11SCM-LN8F

أسئلة حول هذا المنتج

Will this module work in my Supermicro MicroBlade 6119G-C2 without any other hardware changes?

Yes, it is a single 16GB DDR4 2666 ECC VLP UDIMM that fits the 288-pin slots of the 6119G-C2, 6119G-C4 and 6119G-T4 and runs at 1.2V.

Can I keep my existing DDR4 2666 ECC UDIMMs and add this OWC stick alongside them?

It will operate at DDR4 2666 CL19 1.2V; for best stability OWC recommends matching capacity, speed, rank (2Rx8) and manufacturer across all populated slots.

How can I verify the module is running at the rated 2666 MT/s with ECC active after installation?

Check the BIOS memory information or use a tool such as dmidecode to confirm speed shows 2666 MT/s, voltage 1.2V and ECC type reported as enabled.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.