Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green circuit board with black memory chips and gold edge connectors

OWC

OWC 32GB DDR4 2133MHz ECC Registered RDIMM 2R1D42R432GB memory upgrade

SKU CH-TD4S-BHYVR

32 GB DDR4 2133 MHz ECC registered RDIMM for select Supermicro X10SDV server boards

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCYes
  • 32 GB capacity lets servers handle larger workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2133 MHz CL15 timing matches qualified Supermicro boards
  • 2 V operation reduces power draw in dense configurations
  • Validated replacement for Supermicro MEMDR432 part numbers

Server ECC registered memory

This 32 GB DDR4 module runs at 2133 MHz with CL15 timing and 1.2 V operation. It is built for Supermicro X10SDV server and workstation boards. The registered design adds a buffer that stabilises heavy multi-module loads. It cannot be used in standard desktop computers.

DDR4 2133 registered limits

Registered ECC RDIMMs operate at the rated 2133 MHz speed and require a platform that supports registered signalling. Mixing with unbuffered memory is not supported and will prevent boot. The module is validated for the listed Supermicro motherboards only.

288-pin RDIMM build and use

The module uses a standard 288-pin DDR4 connector without a heat spreader, fitting server DIMM slots directly. ECC and registered operation provide error correction and signal integrity for continuous workloads. It replaces Supermicro part numbers MEMDR432LHL01ER21, MEMDR432LSL01ER21 and MEMDR432LSV01ER21.

Põhijooned

  • 32 GB capacity lets servers handle larger workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2133 MHz CL15 timing matches qualified Supermicro boards
  • 2 V operation reduces power draw in dense configurations
  • Validated replacement for Supermicro MEMDR432 part numbers

Tehnilised andmed

BrandOWC
Part Number2R1D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10SDV-4C-TLN2F
Supermicro Motherboard X10SDV-4C-TLN4F
Supermicro Motherboard X10SDV-6C+-TLN4F
Supermicro Motherboard X10SDV-6C-TLN4F
Supermicro Motherboard X10SDV-7TP4F

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

Should I pick the 32 GB 2133 MHz registered ECC module or a different capacity for my Supermicro X10SDV board?

This module provides 32 GB per DIMM at DDR4 2133 CL15 1.2 V in a 288-pin registered ECC form factor. Choose it when your X10SDV motherboard requires registered ECC memory and you need a single 32 GB stick.

What does the PC4-17000 2133 MHz rating deliver once the DIMM is installed in a server?

The PC4-17000 label means a peak transfer rate of 17000 MB/s at 2133 MHz with CL15 latency, giving the bandwidth and error correction the board expects for stable workloads.

How does the DDR4 288-pin registered ECC interface limit what I can mix with this module?

The 288-pin DDR4 registered ECC interface only works with other registered ECC DIMMs; it cannot be mixed with unbuffered or non-ECC memory and will not fit desktop platforms.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.