نقبل الدفع بالعملة المشفرة — لذلك يمكن للعملات الرقمية التي تملكها أن تشتري أجهزة حقيقية.ادفع بالعملة المشفرة، وأنفقها على أجهزة حقيقية. شحن مؤمن مجانا إلى كل أنحاء العالم لما يتجاوز 399 US$. صناديق شحن بسيطة بلا علامة تجارية، ترسل من ألمانيا.شحن مؤمن مجانا لما يتجاوز 399 US$. يُقفل سعرك لمدة 30 دقيقة بمجرد فتح صفحة الدفع.السعر مقفل لمدة 30 دقيقة. كل قطعة مختومة، ورقمها التسلسلي متحقق منه، ومشمولة بضمان 24 شهرا.مختوم، وبضمان 24 شهرا.

قائمة الرصد تسجيل الدخول
Green circuit board with black memory chips and gold edge connectors

OWC

OWC 32GB DDR4 2133MHz ECC Registered RDIMM 2R1D42R432GB memory upgrade

SKU CH-TD4S-BHYVR

32 GB DDR4 2133 MHz ECC registered RDIMM for select Supermicro X10SDV server boards

  • Capacity32GB
  • Type288-Pin DDR4 ECC RDIMM
  • SpeedDDR4 2133 (PC4 17000)
  • CAS LatencyCL15
  • Voltage1.2V
  • ECCYes
  • 32 GB capacity lets servers handle larger workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2133 MHz CL15 timing matches qualified Supermicro boards
  • 2 V operation reduces power draw in dense configurations
  • Validated replacement for Supermicro MEMDR432 part numbers

Server ECC registered memory

This 32 GB DDR4 module runs at 2133 MHz with CL15 timing and 1.2 V operation. It is built for Supermicro X10SDV server and workstation boards. The registered design adds a buffer that stabilises heavy multi-module loads. It cannot be used in standard desktop computers.

DDR4 2133 registered limits

Registered ECC RDIMMs operate at the rated 2133 MHz speed and require a platform that supports registered signalling. Mixing with unbuffered memory is not supported and will prevent boot. The module is validated for the listed Supermicro motherboards only.

288-pin RDIMM build and use

The module uses a standard 288-pin DDR4 connector without a heat spreader, fitting server DIMM slots directly. ECC and registered operation provide error correction and signal integrity for continuous workloads. It replaces Supermicro part numbers MEMDR432LHL01ER21, MEMDR432LSL01ER21 and MEMDR432LSV01ER21.

أبرز المميزات

  • 32 GB capacity lets servers handle larger workloads
  • ECC registered design detects and corrects data errors
  • DDR4 2133 MHz CL15 timing matches qualified Supermicro boards
  • 2 V operation reduces power draw in dense configurations
  • Validated replacement for Supermicro MEMDR432 part numbers

المواصفات

BrandOWC
Part Number2R1D42R432GB
Capacity32GB
Type288-Pin DDR4 ECC RDIMM
SpeedDDR4 2133 (PC4 17000)
CAS LatencyCL15
Voltage1.2V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro Motherboard X10SDV-4C-TLN2F
Supermicro Motherboard X10SDV-4C-TLN4F
Supermicro Motherboard X10SDV-6C+-TLN4F
Supermicro Motherboard X10SDV-6C-TLN4F
Supermicro Motherboard X10SDV-7TP4F

إصدارات أخرى من هذا الطراز

5 أخرى من الفئة نفسها

نفس الفئة، بذاكرة أو مبرّد أو تردد مختلف — قارن قبل أن تقرر.

أسئلة حول هذا المنتج

Should I pick the 32 GB 2133 MHz registered ECC module or a different capacity for my Supermicro X10SDV board?

This module provides 32 GB per DIMM at DDR4 2133 CL15 1.2 V in a 288-pin registered ECC form factor. Choose it when your X10SDV motherboard requires registered ECC memory and you need a single 32 GB stick.

What does the PC4-17000 2133 MHz rating deliver once the DIMM is installed in a server?

The PC4-17000 label means a peak transfer rate of 17000 MB/s at 2133 MHz with CL15 latency, giving the bandwidth and error correction the board expects for stable workloads.

How does the DDR4 288-pin registered ECC interface limit what I can mix with this module?

The 288-pin DDR4 registered ECC interface only works with other registered ECC DIMMs; it cannot be mixed with unbuffered or non-ECC memory and will not fit desktop platforms.

أيضًا في هذا القسم

عملاء قارنوا هذه المنتجات

نفس القسم، ونفس صفحة الدفع — ثماني عملات رقمية وقفل سعر لمدة 30 دقيقة.