Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

OWC

OWC 64GB (4x16GB) DDR3 1600 CL11 ECC RDIMM 1R6D32R4064S

SKU CH-35D7-ZP7J7

64 GB kit of four 16 GB DDR3-1600 CL11 ECC registered DIMMs for Supermicro SuperServer 1017GR and 1017R systems

  • Capacity64GB (4 x 16GB)
  • Type240-Pin DDR3 ECC RDIMM
  • SpeedDDR3 1600 (PC3 12800)
  • CAS LatencyCL11
  • Voltage1.5V
  • ECCYes

Capacity 64GB (4 x 16GB)

  • ECC registered design protects data integrity in servers
  • 64 GB kit (4 × 16 GB) expands memory capacity
  • DDR3 1600 CL11 matches Supermicro 1017 series specs
  • 5 V 240-pin RDIMM fits registered DIMM slots
  • 2Rx4 organisation optimises rank density for workloads

Server ECC RDIMM kit

This OWC kit provides 64GB of DDR3 1600 ECC registered memory across four 16GB modules. It is built for Supermicro SuperServer 1017GR and 1017R series systems that require registered DIMMs with error correction. Workstations and standard desktop computers cannot use this memory type. Buyers needing unbuffered or non-ECC modules for consumer platforms must choose a different product.

Straightforward DIMM installation

The 240-pin modules seat into standard DDR3 RDIMM slots on the supported Supermicro boards. No heat spreaders are fitted, so clearance around tall CPU coolers is not reduced. The most common issue is mixing these registered DIMMs with unbuffered memory or populating slots in an order the server firmware does not expect. Follow the system manual’s population rules and keep all modules identical.

Verify server model and slot count

Confirm the chassis is a Supermicro SuperServer 1017GR or 1017R before ordering. Check that four DDR3 RDIMM slots are available and that the firmware supports 2Rx4 16GB modules at 1.5V. The kit replaces Supermicro part numbers MEMDR316LSL03ER16 and MEMDR316LSV01ER16. Systems requiring different voltages, ranks, or unbuffered memory will not be compatible.

Põhijooned

  • ECC registered design protects data integrity in servers
  • 64 GB kit (4 × 16 GB) expands memory capacity
  • DDR3 1600 CL11 matches Supermicro 1017 series specs
  • 5 V 240-pin RDIMM fits registered DIMM slots
  • 2Rx4 organisation optimises rank density for workloads

Tehnilised andmed

BrandOWC
Part Number1R6D32R4064S
Capacity64GB (4 x 16GB)
Type240-Pin DDR3 ECC RDIMM
SpeedDDR3 1600 (PC3 12800)
CAS LatencyCL11
Voltage1.5V
ECCYes
Buffered/RegisteredRegistered
Rank2Rx4
Heat SpreaderNo
Compatible SystemSupermicro SuperServer 1017GR Series
Supermicro SuperServer 1017R Series

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

How can I verify the kit is running at DDR3 1600 CL11 after installation?

Check the BIOS or a system tool such as CPU-Z; it should report 1600 MHz speed, CL11 timings and 1.5 V on all four modules.

What ships in the box and do I need any extra parts?

The box contains four 16 GB 240-pin DDR3 ECC registered DIMMs; no cables, brackets or additional components are required.

Which capacity version should I choose for a Supermicro SuperServer 1017GR or 1017R?

This 64 GB kit (4 × 16 GB, 2Rx4) matches the Supermicro part numbers MEMDR316LSL03ER16 and MEMDR316LSV01ER16 for those servers.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.