Phanteks
Phanteks PH-F120SK_DRGB_PWM_3P 3-pack 120mm case fan
Three 120 mm case fans with nine-blade design, 50 CFM airflow, 30.3 dB(A) noise, PWM speed control from 500 to 1500 RPM, digital RGB lighting and rubber dampening washers
- Fan Counts3 Fans
- Fan ControllerNo Controller
- TypeCase Fan
- CompatibilityCase
- Fan Thickness25mm
- Bearing TypeRifle
- Nine-blade design delivers 50 CFM airflow at 1500 RPM
- PWM control adjusts speed from 500 RPM for quiet operation
- Rifle bearing and rubber dampeners keep noise to 30.3 dB(A)
- Digital RGB lighting syncs with motherboards via 3-pin daisy-chain
- 3-pack includes 120 mm fans, 24 rubber pads and cables
Three-pack 120mm DRGB case fans
This set supplies three Phanteks SK120 DRGB PWM fans for builders who want coordinated airflow and addressable lighting across a chassis. Each unit uses a nine-blade impeller driven by a rifle bearing to move up to 50 CFM while spinning between 500 and 1500 RPM. The 25 mm thick black frames fit standard 120 mm mounting points and include rubber pads to isolate vibration from the case structure.
Motherboard headers and daisy-chain wiring
Verify that your board or controller provides a 4-pin PWM header for speed control and a 3-pin 5 V DRGB header for lighting; the pack includes a DRGB daisy-chain cable and a 4-pin fan extension but no standalone controller. Three fans will occupy three PWM headers or require a splitter, and the DRGB chain needs one motherboard DRGB connector or a compatible Phanteks DRGB hub. Ensure the case has clearance for 120 x 120 x 25 mm fans at each intended location.
Sustained-load acoustics and thermal behaviour
At the rated maximum of 1500 RPM the fans produce 30.3 dB(A) while delivering their peak 50 CFM, so extended gaming or rendering sessions remain relatively quiet for the airflow provided. PWM curves let the firmware lower speed once temperatures stabilise, reducing noise further during long idle or light-load periods. The rifle bearing and rigid frame are designed to maintain consistent speed and low vibration over continuous operation without the rattling that can develop on lesser mounts.
Põhijooned
- Nine-blade design delivers 50 CFM airflow at 1500 RPM
- PWM control adjusts speed from 500 RPM for quiet operation
- Rifle bearing and rubber dampeners keep noise to 30.3 dB(A)
- Digital RGB lighting syncs with motherboards via 3-pin daisy-chain
- 3-pack includes 120 mm fans, 24 rubber pads and cables
Tehnilised andmed
| Brand | Phanteks |
|---|---|
| Series | SK PWM FAN 120mm D-RGB 3 Pack |
| Model | PH-F120SK_DRGB_PWM_3P |
| Fan Counts | 3 Fans |
| Fan Controller | No Controller |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Rifle |
| RPM | 500 - 1500 +5% -10% RPM |
| Air Flow | 50 CFM |
| Noise Level | 30.3 dB(A) |
| Power Connector | 4 Pin |
| Color | Black |
| LED | Digital RGB |
| Features | Nine-blade design offers a higher airflow and quiet cooling solution for the best performance PWM capabilities built-in to precisely control the speed to achieve optimized fan curve Rigid frame design and included rubber dampeners helps to prevent vibration Low-noise operation without sacrificing performance Digital RGB lighting solution to sync with Phanteks DRGB products and compatible DRGB Motherboards Includes 3x 120mm DRGB fans |
| Dimensions | 120 x 120 x 25 mm |
| Package Contents | 3 x PH-F120SK_DRGB_PWM 12 x Fan Screws 24 x Rubber Pad 1 x PH-CB-DRGB3P_MB 1 x PH-CB-F4P |
| Tarnekaal | 0.60 kg |
| Pakendi mõõtmed | 173 × 123 × 81 mm |
Küsimused selle toote kohta
What comes in the 3-pack box and what must I buy separately?
The box contains three 120 mm fans, twelve mounting screws, twenty-four rubber dampening pads, one 3-pin D-RGB daisy-chain cable and one 4-pin PWM extension cable. A D-RGB controller or compatible motherboard header is required to drive the lighting.
Should I choose the 120 mm or 140 mm version for my case?
This SKU is the 120 mm variant; the 140 mm model is a separate product. Pick 120 mm if your case mounts 120 x 120 x 25 mm fans, otherwise select the 140 mm version.
What does the 50 CFM airflow rating mean once the fans are installed?
At up to 1500 RPM each fan moves 50 CFM at 30.3 dB(A); three fans together provide roughly 150 CFM of case airflow while PWM lets the motherboard lower speed for quieter idle operation.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001042BTC
Laos