Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Gray aluminum M.2 NVME enclosure with USB-C port and blue LED

PHIXERO

PHIXERO M.2 NVME Enclosure USB 3.1 Gen2 10Gbps Gray

SKU CH-P3YD-JJZ6T

Aluminum M.2 NVME enclosure with triple heat dissipation, UASP and TRIM support, and an included 9.85 inch 10Gbps USB-C cable for 2230 to 2280 drives up to 4TB

  • ColorGray
  • SizeM.2
  • TypeEnclosure
  • MaterialAluminum
  • Internal InterfaceM.2 NVME M-Key
  • External InterfaceUSB Type C
  • Triple heat dissipation cuts SSD temperature rise by 40 percent
  • 10Gbps USB 3.1 Gen2 transfer with UASP boosting speed by 20 percent
  • 2-in-1 cable fits USB-A and USB-C ports at 9.85 inch length
  • Tool-free plug-and-play with TRIM support and smart sleep after 10 minutes
  • Fits M-Key and B&M-Key NVME drives 2230 2242 2260 2280 up to 4TB

M.2 NVME Enclosure with USB 3.1 Gen2 10Gbps

This PHIXERO enclosure turns a single M-Key or B&M-Key NVME stick into portable external storage. It accepts 2230, 2242, 2260 and 2280 form factors up to 4TB and connects through a USB Type C port with the included 2-in-1 cable.

Suits Users with One NVMe Drive.

The aluminium shell and triple heat dissipation design lower drive temperature by 40 percent, protecting sustained transfer rates. UASP and TRIM support cut latency by 20 percent, while the blue LED and intelligent sleep mode after 10 minutes of inactivity simplify daily use.

Deciding Spec: USB 3.1 Gen2 10Gbps External

This bandwidth ceiling determines the maximum real-world throughput you will see from any NVME drive installed inside. If your workflow needs more than 10Gbps, this enclosure will be the bottleneck.

Põhijooned

  • Triple heat dissipation cuts SSD temperature rise by 40 percent
  • 10Gbps USB 3.1 Gen2 transfer with UASP boosting speed by 20 percent
  • 2-in-1 cable fits USB-A and USB-C ports at 9.85 inch length
  • Tool-free plug-and-play with TRIM support and smart sleep after 10 minutes
  • Fits M-Key and B&M-Key NVME drives 2230 2242 2260 2280 up to 4TB

Tehnilised andmed

BrandPHIXERO
ModelM.2 SSD Enclosure
ColorGray
SizeM.2
TypeEnclosure
MaterialAluminum
Internal InterfaceM.2 NVME M-Key
External InterfaceUSB Type C
HDD Count SupportedSingle NVMe SSD
Maximum Capacity (per Bay)Up to 4TB

Küsimused selle toote kohta

What does the USB 3.1 Gen2 10Gbps interface cap transfer speeds at in practice?

The USB 3.1 Gen2 10Gbps interface limits real-world throughput to 10Gbps, and the included 2-in-1 cable with copper core and graphene shielding is designed to deliver that full speed.

What physical SSD sizes and key types fit inside this enclosure?

It accepts M-Key and B&M-Key NVME SSDs in 2230, 2242, 2260 and 2280 form factors, up to 4TB capacity.

How is the enclosure installed, and what step do people often miss?

Insert the NVME SSD into the M.2 slot, secure it with the screw, close the aluminum case, then connect the 2-in-1 cable to a USB-A or USB-C port; the blue LED confirms power and activity.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.