Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Gray aluminum M.2 NVME enclosure with USB-C port and blue LED

PHIXERO

PHIXERO M.2 NVME Enclosure USB 3.1 Gen2 10Gbps Gray

SKU CH-P3YD-JJZ6T

Aluminum M.2 NVME enclosure with triple heat dissipation, UASP and TRIM support, and an included 9.85 inch 10Gbps USB-C cable for 2230 to 2280 drives up to 4TB

  • ColorGray
  • SizeM.2
  • TypeEnclosure
  • MaterialAluminum
  • Internal InterfaceM.2 NVME M-Key
  • External InterfaceUSB Type C
  • Triple heat dissipation cuts SSD temperature rise by 40 percent
  • 10Gbps USB 3.1 Gen2 transfer with UASP boosting speed by 20 percent
  • 2-in-1 cable fits USB-A and USB-C ports at 9.85 inch length
  • Tool-free plug-and-play with TRIM support and smart sleep after 10 minutes
  • Fits M-Key and B&M-Key NVME drives 2230 2242 2260 2280 up to 4TB

M.2 NVME Enclosure with USB 3.1 Gen2 10Gbps

This PHIXERO enclosure turns a single M-Key or B&M-Key NVME stick into portable external storage. It accepts 2230, 2242, 2260 and 2280 form factors up to 4TB and connects through a USB Type C port with the included 2-in-1 cable.

Suits Users with One NVMe Drive.

The aluminium shell and triple heat dissipation design lower drive temperature by 40 percent, protecting sustained transfer rates. UASP and TRIM support cut latency by 20 percent, while the blue LED and intelligent sleep mode after 10 minutes of inactivity simplify daily use.

Deciding Spec: USB 3.1 Gen2 10Gbps External

This bandwidth ceiling determines the maximum real-world throughput you will see from any NVME drive installed inside. If your workflow needs more than 10Gbps, this enclosure will be the bottleneck.

Přednosti

  • Triple heat dissipation cuts SSD temperature rise by 40 percent
  • 10Gbps USB 3.1 Gen2 transfer with UASP boosting speed by 20 percent
  • 2-in-1 cable fits USB-A and USB-C ports at 9.85 inch length
  • Tool-free plug-and-play with TRIM support and smart sleep after 10 minutes
  • Fits M-Key and B&M-Key NVME drives 2230 2242 2260 2280 up to 4TB

Specifikace

BrandPHIXERO
ModelM.2 SSD Enclosure
ColorGray
SizeM.2
TypeEnclosure
MaterialAluminum
Internal InterfaceM.2 NVME M-Key
External InterfaceUSB Type C
HDD Count SupportedSingle NVMe SSD
Maximum Capacity (per Bay)Up to 4TB

Otázky k tomuto produktu

What does the USB 3.1 Gen2 10Gbps interface cap transfer speeds at in practice?

The USB 3.1 Gen2 10Gbps interface limits real-world throughput to 10Gbps, and the included 2-in-1 cable with copper core and graphene shielding is designed to deliver that full speed.

What physical SSD sizes and key types fit inside this enclosure?

It accepts M-Key and B&M-Key NVME SSDs in 2230, 2242, 2260 and 2280 form factors, up to 4TB capacity.

How is the enclosure installed, and what step do people often miss?

Insert the NVME SSD into the M.2 slot, secure it with the screw, close the aluminum case, then connect the 2-in-1 cable to a USB-A or USB-C port; the blue LED confirms power and activity.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.