Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Sky-blue brass 90-degree rotary elbow fitting with 15mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 15mm Extension Elbow Sky Blue

SKU CH-K63G-67QWK

A G1/4 rotary 90-degree elbow with a 15 mm extension and 360-degree swivel for flexible loop routing

  • TypeFittings
  • 360° rotary lets you aim the port in any direction
  • 90° elbow redirects tubing around tight component layouts
  • 15 mm extension adds clearance when space is limited
  • G1/4 brass threads fit standard water-cooling loops
  • Sky-blue powder coat matches themed builds

Redirects tight loops

The PrimoChill G1/4 90° rotary elbow changes a tube run direction by ninety degrees while adding fifteen millimetres of installed height. Its male-to-female threads let it sit between any standard component and fitting without extra adapters. The 360-degree rotary joint lets you clock the outlet to any angle after the base is seated.

Solves clearance conflicts

Use this elbow when a straight fitting or rigid tube would hit a motherboard heatsink, graphics card back-plate or reservoir port. The fifteen millimetre stand-off and full rotation replace the need for multiple angled adapters or custom bends. The jump is worth it whenever a single rigid turn plus a small height gain clears the obstruction.

Fits standard G1/4 ports

Thread depth is five millimetres and total height reaches 37.7 millimetres, so verify the mating component has enough internal thread length. Brass construction with SX powder coat resists corrosion in typical coolant mixes. One fitting is included; order two or more for parallel GPU blocks or dual-radiator loops.

Põhijooned

  • 360° rotary lets you aim the port in any direction
  • 90° elbow redirects tubing around tight component layouts
  • 15 mm extension adds clearance when space is limited
  • G1/4 brass threads fit standard water-cooling loops
  • Sky-blue powder coat matches themed builds

Tehnilised andmed

TypeFittings

Küsimused selle toote kohta

What thread size and clearance does this G1/4 90° rotary elbow need to fit?

It uses standard G1/4 threads with a 5 mm thread depth and adds a 15 mm installed base height, so the port must accept that depth and have at least 15 mm of clearance above it.

How is the rotary elbow installed, and what step is often missed?

Thread the male end into the component port, then rotate the female collar 360° to aim the 90° outlet before tightening; the step often missed is setting the final angle before the lock ring is secured.

What maintenance will this brass Sky Blue fitting need later?

The SX powder-coated brass resists corrosion; periodically check the G1/4 seal for weeping and wipe the exterior with a soft cloth — no disassembly or lubrication is required.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.