Sprejemamo kriptovalute — tako lahko sredstva, ki jih imate, kupijo pravo strojno opremo.Plačajte v kriptovaluti, zapravite jo za pravo strojno opremo. Brezplačna zavarovana dostava po vsem svetu nad 399 $. Nevtralni kartoni brez znamke, poslani iz Nemčije.Brezplačna zavarovana dostava nad 399 $. Vaš tečaj je zaklenjen za 30 minut, takoj ko se odpre blagajna.Tečaj zaklenjen 30 minut. Vsak izdelek je zapečaten, njegova serijska številka preverjena, in krit z 24-mesečno garancijo.Zapečateno, 24-mesečna garancija.

Spremljani izdelki Prijava
Sky-blue brass 90-degree rotary elbow fitting with 15mm extension

PrimoChill

PrimoChill G1/4 90° Rotary 15mm Extension Elbow Sky Blue

SKU CH-K63G-67QWK

A G1/4 rotary 90-degree elbow with a 15 mm extension and 360-degree swivel for flexible loop routing

  • TypeFittings
  • 360° rotary lets you aim the port in any direction
  • 90° elbow redirects tubing around tight component layouts
  • 15 mm extension adds clearance when space is limited
  • G1/4 brass threads fit standard water-cooling loops
  • Sky-blue powder coat matches themed builds

Redirects tight loops

The PrimoChill G1/4 90° rotary elbow changes a tube run direction by ninety degrees while adding fifteen millimetres of installed height. Its male-to-female threads let it sit between any standard component and fitting without extra adapters. The 360-degree rotary joint lets you clock the outlet to any angle after the base is seated.

Solves clearance conflicts

Use this elbow when a straight fitting or rigid tube would hit a motherboard heatsink, graphics card back-plate or reservoir port. The fifteen millimetre stand-off and full rotation replace the need for multiple angled adapters or custom bends. The jump is worth it whenever a single rigid turn plus a small height gain clears the obstruction.

Fits standard G1/4 ports

Thread depth is five millimetres and total height reaches 37.7 millimetres, so verify the mating component has enough internal thread length. Brass construction with SX powder coat resists corrosion in typical coolant mixes. One fitting is included; order two or more for parallel GPU blocks or dual-radiator loops.

Poudarki

  • 360° rotary lets you aim the port in any direction
  • 90° elbow redirects tubing around tight component layouts
  • 15 mm extension adds clearance when space is limited
  • G1/4 brass threads fit standard water-cooling loops
  • Sky-blue powder coat matches themed builds

Specifikacije

TypeFittings

Vprašanja o tem izdelku

What thread size and clearance does this G1/4 90° rotary elbow need to fit?

It uses standard G1/4 threads with a 5 mm thread depth and adds a 15 mm installed base height, so the port must accept that depth and have at least 15 mm of clearance above it.

How is the rotary elbow installed, and what step is often missed?

Thread the male end into the component port, then rotate the female collar 360° to aim the 90° outlet before tightening; the step often missed is setting the final angle before the lock ring is secured.

What maintenance will this brass Sky Blue fitting need later?

The SX powder-coated brass resists corrosion; periodically check the G1/4 seal for weeping and wipe the exterior with a soft cloth — no disassembly or lubrication is required.

Tudi v tem oddelku

Stranke so primerjale tudi te

Ista polica, ista blagajna — osem kriptovalut in 30-minutni zaklep tečaja.