Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Grey ATX power supply unit with 80mm fan and cables

Replace Power

Replace Power RPSU-C99-9 power supply 420W ATX 80mm fan Grey

SKU CH-WKT7-3VYF3 MPN RPSU-C99-9

A 420 W ATX replacement power supply with an 80 mm fan, 20+4 pin and SATA connectors, and switchable 110 V or 220 V input

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • 420 W output powers demanding desktop builds
  • 80 mm fan keeps components cool under load
  • Switchable 110 V or 220 V input suits global mains
  • 20+4 pin ATX and 12 V connectors fit modern motherboards
  • SATA, peripheral and floppy leads cover legacy and current drives

Replacement PSU for HP Pavilion and Elite desktops

This 420W ATX power supply replaces the original HP 5187-1098 unit found in Pavilion a1300la, a1410n, d4990y CTO and Elite HPE-210Y systems. It delivers 110V or 220V input via a manual switch and uses an 80mm fan for cooling. The grey chassis weighs 0.1kg and fits standard ATX mounting points.

ATX connector limits and cable reach

The single 14-inch ATX connector supports both 20-pin and 24-pin motherboard headers, while the 14-inch 12V ATX plug feeds the CPU. One 15-inch SATA connector serves a single drive, and two 15-inch plus two 6-inch large peripheral connectors handle older devices. A 6-inch small floppy connector is also included. Cable lengths restrict routing in larger chassis.

Upgrade from a failed or undersized OEM unit

This unit replaces a faulty original supply or one that cannot sustain the 420W rating under load. The jump is worth it when the existing PSU has failed, lacks the 20+4 ATX flexibility, or cannot power the installed SATA and peripheral devices. It is not for builds needing multiple SATA drives, PCIe graphics power, or higher continuous wattage.

Põhijooned

  • 420 W output powers demanding desktop builds
  • 80 mm fan keeps components cool under load
  • Switchable 110 V or 220 V input suits global mains
  • 20+4 pin ATX and 12 V connectors fit modern motherboards
  • SATA, peripheral and floppy leads cover legacy and current drives

Tehnilised andmed

BrandReplace Power
ModelRPSU-C99-9
ColorGrey
TypeATX
Fans1
Weight0.1

Küsimused selle toote kohta

Which version of the RPSU-C99-9 should I pick for my HP Pavilion a1300la or Elite HPE-210Y?

The RPSU-C99-9 is a single 420 W ATX unit with a grey finish and an 80 mm fan; it directly replaces the HP 5187-1098 PSU used in the Pavilion a1300la, a1410n, d4990y CTO and Elite HPE-210Y models.

What does the 420 W rating deliver in a real desktop build?

The 420 W output runs from a switchable 110 V or 220 V input and powers the motherboard through a 20+4 pin ATX connector plus a dedicated 12 V ATX connector, while also feeding drives via SATA and peripheral leads.

Which connectors does the ATX interface provide and what limits apply?

The unit supplies one 15-inch SATA connector, one 14-inch 20+4 pin ATX connector, one 14-inch 12 V ATX connector, two 15-inch large peripheral connectors, two 6-inch large peripheral connectors and one 6-inch small peripheral connector.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.