Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Grey ATX power supply unit with 80mm fan and cables

Replace Power

Replace Power RPSU-C99-9 power supply 420W ATX 80mm fan Grey

SKU CH-WKT7-3VYF3 MPN RPSU-C99-9

A 420 W ATX replacement power supply with an 80 mm fan, 20+4 pin and SATA connectors, and switchable 110 V or 220 V input

  • ColorGrey
  • TypeATX
  • Fans1
  • Weight0.1
  • 420 W output powers demanding desktop builds
  • 80 mm fan keeps components cool under load
  • Switchable 110 V or 220 V input suits global mains
  • 20+4 pin ATX and 12 V connectors fit modern motherboards
  • SATA, peripheral and floppy leads cover legacy and current drives

Replacement PSU for HP Pavilion and Elite desktops

This 420W ATX power supply replaces the original HP 5187-1098 unit found in Pavilion a1300la, a1410n, d4990y CTO and Elite HPE-210Y systems. It delivers 110V or 220V input via a manual switch and uses an 80mm fan for cooling. The grey chassis weighs 0.1kg and fits standard ATX mounting points.

ATX connector limits and cable reach

The single 14-inch ATX connector supports both 20-pin and 24-pin motherboard headers, while the 14-inch 12V ATX plug feeds the CPU. One 15-inch SATA connector serves a single drive, and two 15-inch plus two 6-inch large peripheral connectors handle older devices. A 6-inch small floppy connector is also included. Cable lengths restrict routing in larger chassis.

Upgrade from a failed or undersized OEM unit

This unit replaces a faulty original supply or one that cannot sustain the 420W rating under load. The jump is worth it when the existing PSU has failed, lacks the 20+4 ATX flexibility, or cannot power the installed SATA and peripheral devices. It is not for builds needing multiple SATA drives, PCIe graphics power, or higher continuous wattage.

Kohokohdat

  • 420 W output powers demanding desktop builds
  • 80 mm fan keeps components cool under load
  • Switchable 110 V or 220 V input suits global mains
  • 20+4 pin ATX and 12 V connectors fit modern motherboards
  • SATA, peripheral and floppy leads cover legacy and current drives

Tekniset tiedot

BrandReplace Power
ModelRPSU-C99-9
ColorGrey
TypeATX
Fans1
Weight0.1

Kysymyksiä tästä tuotteesta

Which version of the RPSU-C99-9 should I pick for my HP Pavilion a1300la or Elite HPE-210Y?

The RPSU-C99-9 is a single 420 W ATX unit with a grey finish and an 80 mm fan; it directly replaces the HP 5187-1098 PSU used in the Pavilion a1300la, a1410n, d4990y CTO and Elite HPE-210Y models.

What does the 420 W rating deliver in a real desktop build?

The 420 W output runs from a switchable 110 V or 220 V input and powers the motherboard through a 20+4 pin ATX connector plus a dedicated 12 V ATX connector, while also feeding drives via SATA and peripheral leads.

Which connectors does the ATX interface provide and what limits apply?

The unit supplies one 15-inch SATA connector, one 14-inch 20+4 pin ATX connector, one 14-inch 12 V ATX connector, two 15-inch large peripheral connectors, two 6-inch large peripheral connectors and one 6-inch small peripheral connector.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.