RIITOP
RIITOP USB 3.2 12+16 PIN Apple SSD Enclosure with M.2 2280 Adapter
Enclosure connects 12+16 pin Apple AHCI SSDs and M.2 2280 NVMe drives via USB 3.2 at up to 20 Gbps
- TypeEnclosure
- Read 2013-2017 Apple AHCI SSDs at 10 Gbps via USB 3.2 Gen 2
- Aluminium enclosure cools 12+16-pin drives without a fan
- Includes M.2 2280 adapter for NVMe SSDs
- USB-C cable and screwdriver supplied for immediate use
- Works on Windows 7-11, Mac OS 10.0+, Linux 2.6+
Apple 12+16 pin SSD adapter
This enclosure connects original Apple 12+16 pin AHCI SSDs from 2013 to 2017 MacBook Air, MacBook Pro, iMac and Mac Pro models to a USB-C host. An included M.2 2280 adapter also allows NVMe drives to be used in the same enclosure. It is intended for data recovery or repurposing a removed module.
Critical compatibility constraint
The enclosure only accepts Apple 12+16 pin AHCI SSDs and M.2 NVMe drives; it does not support Toshiba 12+16 pin SSDs, SATA SSDs or any NVMe-protocol Apple drive. Macs running macOS Sonoma are not supported. Buyers must verify the drive pinout and protocol before purchase.
Straightforward installation
A captive screwdriver and a short USB-C cable with a Type-A adapter are supplied so the drive can be secured and connected without extra tools. The aluminium case aids heat dissipation; disabling disk sleep in the host OS prevents unexpected disconnects during long transfers. Users who need to read Apple NVMe drives or Toshiba 12+16 pin modules cannot use this product.
Põhijooned
- Read 2013-2017 Apple AHCI SSDs at 10 Gbps via USB 3.2 Gen 2
- Aluminium enclosure cools 12+16-pin drives without a fan
- Includes M.2 2280 adapter for NVMe SSDs
- USB-C cable and screwdriver supplied for immediate use
- Works on Windows 7-11, Mac OS 10.0+, Linux 2.6+
Tehnilised andmed
| Type | Enclosure |
|---|
Küsimused selle toote kohta
What does the 20 Gbps figure mean once the enclosure is connected to a real machine?
The 20 Gbps rate is the theoretical ceiling of the USB 3.2 Gen2x2 link; actual throughput depends on the host controller, cable quality, and the Apple AHCI SSD’s own speed limit, so real-world transfers will be lower.
Which interface standard is used and what does it cap in practice?
The enclosure uses a USB 3.2 Gen2 Type-C connection rated at 10 Gbps, rising to 20 Gbps only when the host supports USB 3.2 Gen2x2; the Apple 12+16 PIN AHCI SSD itself cannot exceed the Gen2 ceiling.
What does the enclosure physically need to fit or mount the Apple SSD?
The aluminum case accepts the bare 12+16 PIN Apple Flash AHCI module directly; a supplied M.2 2280 NVMe adapter board is included for M.2 drives, and a small screwdriver is provided to secure the SSD in the tray.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
