Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Small CPU heatsink with integrated fan for USFF systems

Ruth's sister

Ruth's sister 9020 9000 USFF CPU Cooler 0VXD9P 04X9H2

SKU CH-99P3-1H8QC

Compact USFF heatsink and fan assembly with a 6-pin power interface for 9020 and 9000 systems

  • Designed for 9020 and 9000 USFF systems
  • 6-pin power interface ensures stable fan operation
  • Compact small heatsink fits ultra-small form factor cases
  • Includes cooling fan and heatsink in one unit
  • MPN 0VXD9P 04X9H2 confirms exact replacement part

Ruth's sister 9020 USFF Cooler

This compact air cooler fits the 9020 and 9000 USFF chassis. It targets system integrators and repair technicians who need a direct replacement for the original thermal module. The six-pin power interface matches the board header on these small-form-factor platforms. Builders working on standard ATX or larger SFF cases should look elsewhere.

Installation notes for 6-pin USFF module

The unit installs as a single fan-and-heatsink assembly that seats over the processor socket. Alignment posts on the chassis guide placement, so no separate brackets are required. The six-pin connector must seat fully; a partial insertion will leave the fan unpowered and the CPU unprotected. Cable routing space is tight, so dress the lead before final screw-down.

Cooling capacity for low-power USFF CPUs

The small heatsink handles the thermal output of processors designed for the 9020 and 9000 ultra-small platforms. It maintains safe temperatures at stock speeds in the restricted airflow of the original chassis. Overclocked chips or higher-wattage substitutions will exceed its dissipation ability. Sustained heavy loads in poorly ventilated enclosures may also push past its limit.

Põhijooned

  • Designed for 9020 and 9000 USFF systems
  • 6-pin power interface ensures stable fan operation
  • Compact small heatsink fits ultra-small form factor cases
  • Includes cooling fan and heatsink in one unit
  • MPN 0VXD9P 04X9H2 confirms exact replacement part

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Küsimused selle toote kohta

How can I confirm the 6-pin fan is spinning correctly after installing the 9020 9000 USFF cooler?

Connect the 6-pin power interface to the motherboard header, power on the system and enter the BIOS hardware monitor to verify the fan RPM is reported and the CPU temperature remains stable under load.

What components are included with the 0VXD9P heatsink and which parts must be sourced separately?

The package contains the small heatsink with integrated cooling fan and the 6-pin power connector; thermal paste and any mounting hardware specific to your chassis are not included and must be purchased separately.

Which model number should I select for a Dell OptiPlex 9020 or 9000 USFF system?

Choose the cooler labelled 0VXD9P or 04X9H2, as these part numbers correspond to the 9020 and 9000 USFF form factor listed in the product details.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.