Prihvaćamo kriptovalute — tako kriptovalute koje posjedujete mogu kupiti pravi hardver.Plaćajte kriptovalutom, trošite je na pravi hardver. Besplatna osigurana dostava diljem svijeta iznad 399 $. Obični vanjski kartoni bez oznaka, otpremaju se iz Njemačke.Besplatna osigurana dostava iznad 399 $. Vaš je tečaj blokiran 30 minuta od otvaranja blagajne.Tečaj blokiran 30 minuta. Svaki je artikl zapečaćen, njegov serijski broj provjeren, i pokriven jamstvom od 24 mjeseca.Zapečaćen, jamstvo 24 mjeseca.

Praćeni artikli Prijava
Small CPU heatsink with integrated fan for USFF systems

Ruth's sister

Ruth's sister 9020 9000 USFF CPU Cooler 0VXD9P 04X9H2

SKU CH-99P3-1H8QC

Compact USFF heatsink and fan assembly with a 6-pin power interface for 9020 and 9000 systems

  • Designed for 9020 and 9000 USFF systems
  • 6-pin power interface ensures stable fan operation
  • Compact small heatsink fits ultra-small form factor cases
  • Includes cooling fan and heatsink in one unit
  • MPN 0VXD9P 04X9H2 confirms exact replacement part

Ruth's sister 9020 USFF Cooler

This compact air cooler fits the 9020 and 9000 USFF chassis. It targets system integrators and repair technicians who need a direct replacement for the original thermal module. The six-pin power interface matches the board header on these small-form-factor platforms. Builders working on standard ATX or larger SFF cases should look elsewhere.

Installation notes for 6-pin USFF module

The unit installs as a single fan-and-heatsink assembly that seats over the processor socket. Alignment posts on the chassis guide placement, so no separate brackets are required. The six-pin connector must seat fully; a partial insertion will leave the fan unpowered and the CPU unprotected. Cable routing space is tight, so dress the lead before final screw-down.

Cooling capacity for low-power USFF CPUs

The small heatsink handles the thermal output of processors designed for the 9020 and 9000 ultra-small platforms. It maintains safe temperatures at stock speeds in the restricted airflow of the original chassis. Overclocked chips or higher-wattage substitutions will exceed its dissipation ability. Sustained heavy loads in poorly ventilated enclosures may also push past its limit.

Istaknuto

  • Designed for 9020 and 9000 USFF systems
  • 6-pin power interface ensures stable fan operation
  • Compact small heatsink fits ultra-small form factor cases
  • Includes cooling fan and heatsink in one unit
  • MPN 0VXD9P 04X9H2 confirms exact replacement part

Specifikacije

Za ovaj artikl još nisu objavljene specifikacije.

Pitanja o ovom artiklu

How can I confirm the 6-pin fan is spinning correctly after installing the 9020 9000 USFF cooler?

Connect the 6-pin power interface to the motherboard header, power on the system and enter the BIOS hardware monitor to verify the fan RPM is reported and the CPU temperature remains stable under load.

What components are included with the 0VXD9P heatsink and which parts must be sourced separately?

The package contains the small heatsink with integrated cooling fan and the 6-pin power connector; thermal paste and any mounting hardware specific to your chassis are not included and must be purchased separately.

Which model number should I select for a Dell OptiPlex 9020 or 9000 USFF system?

Choose the cooler labelled 0VXD9P or 04X9H2, as these part numbers correspond to the 9020 and 9000 USFF form factor listed in the product details.

Također u ovoj kategoriji

Kupci su usporedili ovo

Ista polica, ista blagajna — osam valuta i blokada tečaja na 30 minuta.