Sabrent
Sabrent SB-HTSS M.2 2280 NVMe heatsink silver
Copper and aluminium heatsink for M.2 2280 NVMe SSDs, includes thermal tape, screws and screwdriver for easy desktop installation
- Device TypeM.2 Heatsink
- Used ForConsumer
- Form FactorM.2 2280
- HeatSinkwith HeatSink
- FeaturesDesigned for desktop computers Winning combination of copper
- Package Content• Rocket NVMe Heatsink • Thermal tap • Screws • Screwdriver
- Copper-aluminium construction draws heat away from the drive
- Grooved aluminium fins increase surface area for efficient cooling
- Prevents thermal throttling so the SSD sustains peak speeds
- Fits single- and double-sided M.2 2280 modules
- Thermal tape, screws and screwdriver included for quick installation
Sabrent SB-HTSS M.2 2280 heatsink
This Sabrent heatsink fits single-sided and double-sided M.2 2280 drives in desktop computers. It targets builders who want to keep NVMe SSD temperatures under control without liquid cooling. The copper-and-aluminium construction absorbs and spreads heat from the controller and flash. Buyers needing a 2230 or 22110 form factor cannot use this model.
Copper base with grooved aluminium fins
The copper base draws heat directly from the SSD and transfers it to the aluminium fin stack for air cooling. Thermal tape, mounting screws and a screwdriver are included so no extra parts are required. Installation uses the existing M.2 standoff and screw on the motherboard. Builds without an M.2 slot or with a fixed motherboard heatsink that cannot be removed are not compatible.
Sustained thermal performance
Under continuous heavy I/O the copper spreads heat quickly across the aluminium surface area, reducing the chance of thermal throttling. Passive operation means zero noise and no fan header or power cable is needed. Systems with restricted airflow around the M.2 slot will see less benefit than open-air test benches.
Põhijooned
- Copper-aluminium construction draws heat away from the drive
- Grooved aluminium fins increase surface area for efficient cooling
- Prevents thermal throttling so the SSD sustains peak speeds
- Fits single- and double-sided M.2 2280 modules
- Thermal tape, screws and screwdriver included for quick installation
Tehnilised andmed
| Brand | Sabrent |
|---|---|
| Series | Heatsink |
| Model | SB-HTSS |
| Device Type | M.2 Heatsink |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| HeatSink | with HeatSink |
| Features | Designed for desktop computers Winning combination of copper and aluminum for maximum performance Compatible with Single/Double sided M. 2 2280 SSDs Easy to install |
| Package Content | • Rocket NVMe Heatsink • Thermal tap • Screws • Screwdriver • Installation guide |
Küsimused selle toote kohta
Will the copper-aluminium heatsink prevent thermal throttling on a 2280 NVMe drive during sustained writes?
The heatsink uses copper to absorb heat from the SSD and spreads it across the grooved aluminium fins, giving more surface area for cooling and avoiding thermal throttling.
Does the heatsink run silently and without extra power when the SSD is under load all day?
It is a passive cooler with no fan, so it adds no noise or power draw while dissipating heat from the drive continuously.
Do I need to buy thermal pads or tools separately to fit this on a single-sided or double-sided 2280 SSD?
The package includes thermal tape, mounting screws and a screwdriver, so no extra parts or tools are required for either SSD type.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
- Clear
0,82 $
0.00001049BTC
Laos