Seagate
Seagate FireCuda 540 ZP1000GM3A004 1TB internal SSD
1TB M.2 2280 internal SSD with PCI-Express 5.0 x4 interface delivering up to 9500 MBps read and 8500 MBps write speeds for demanding gaming and creative workloads
- Device TypeInternal Solid State Drive (SSD)
- Used ForConsumer
- Form FactorM.2 2280
- Capacity1TB
- Memory Components3D TLC
- InterfacePCI-Express 5.0 x4
- Fast game loads with DirectStorage support
- Sequential reads up to 9500 MBps
- Sequential writes up to 8500 MBps
- Random reads up to 1300000 IOPS
- Random writes up to 1500000 IOPS
Seagate FireCuda 540 1TB PCIe 5.0 SSD
The Seagate FireCuda 540 is a 1TB internal solid-state drive built on the PCI-Express 5.0 x4 interface with NVME protocol. It uses 3D TLC memory to deliver sequential reads up to 9500 MBps and writes up to 8500 MBps. The drive targets enthusiasts and content creators who need high throughput for large project files and modern DirectStorage-enabled titles.
Thermals noise and power
Without a heatsink the drive relies on motherboard cooling to manage thermals during sustained workloads. Active power draw is rated at 10W while idle consumption sits at 144 mW. The M.2 2280 form factor produces no audible noise because it has no moving parts.
Bundle and software impact
The package includes three years of Rescue Data Recovery Services and a five-year limited warranty. These services provide a path to professional recovery if the drive fails and extend the standard coverage period. No additional software utilities or mounting hardware are mentioned in the specifications.
Põhijooned
- Fast game loads with DirectStorage support
- Sequential reads up to 9500 MBps
- Sequential writes up to 8500 MBps
- Random reads up to 1300000 IOPS
- Random writes up to 1500000 IOPS
Tehnilised andmed
| Brand | Seagate |
|---|---|
| Series | FireCuda 540 |
| Model | ZP1000GM3A004 |
| Part Number | ZP1000GM3A004 |
| Device Type | Internal Solid State Drive (SSD) |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 1TB |
| Memory Components | 3D TLC |
| Interface | PCI-Express 5.0 x4 |
| Protocol | NVMe 2.0 |
| Max Sequential Read | Up to 9500 MBps |
| Max Sequential Write | Up to 8500 MBps |
| 4KB Random Read | Up to 1,300,000 IOPS |
| 4KB Random Write | Up to 1,500,000 IOPS |
| MTBF | 1,800,000 hours |
| HeatSink | without HeatSink |
| Power Consumption (Idle) | 144(mW) |
| Power Consumption (Active) | 10W |
| Tarnekaal | 0.06 kg |
| Pakendi mõõtmed | 155 × 108 × 24 mm |
Küsimused selle toote kohta
How do I install the M.2 2280 drive and what step is often missed?
Insert the M.2 2280 module into a PCI-Express 5.0 x4 slot at a 30-degree angle, secure it with the motherboard screw, then enable NVMe 2.0 in BIOS; the step most people miss is checking that the slot runs at Gen 5 speed rather than falling back to Gen 4.
What maintenance or replacement will the 3D TLC 1TB drive need later?
No scheduled maintenance is required; monitor health via SMART tools and replace the drive if the media‑wear indicator approaches 100 % or if the MTBF rating of 1800000 hours is exceeded in critical workloads.
What limit appears first during sustained heavy writes on this PCI-Express 5.0 x4 SSD?
The controller will throttle once the NAND temperature rises under continuous 8500 MBps writes, reducing sequential throughput to protect the 3D TLC memory and keep power draw near the 10 W active rating.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
