Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Silver 3.5 inch bare SATA hard drive with circuit board visible

Seagate

Seagate ST3750640AS 750GB 7200 RPM 16MB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-JA19-J5SRH MPN ST3750640AS

A 750 GB desktop hard drive spinning at 7200 RPM with 16 MB cache and a SATA 3.0 Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity750GB
  • RPM7200 RPM
  • Cache16MB
  • Average Seek Time8.5ms
  • 750 GB capacity stores large data sets
  • 7200 RPM spindle speed delivers fast data access
  • 16 MB cache buffers frequent read and write operations
  • SATA 3.0 Gb/s interface enables high-throughput transfers
  • Perpendicular recording technology increases data density for greater reliability

Desktop storage for servers and workstations

The Seagate BarraCuda 7200.10 ST3750640AS is a 750GB 3.5 inch internal hard drive that spins at 7200 RPM with a 16MB cache. It uses perpendicular recording technology to reach this capacity in the standard form factor and is described by the manufacturer as ideal for server environments.

Check your motherboard and cabling before ordering

The drive connects through a SATA 3.0Gb/s interface and requires a matching port and data cable on the host system. Verify that the BIOS or controller can address a 750GB volume and that the operating system can initialise a drive of this size without additional drivers.

Bare drive construction

Supplied without brackets, screws or cables, the unit is intended for installation into a 3.5 inch bay using standard mounting points. The SoftSonic motor keeps acoustic output low while Enhanced G-Force Protection helps defend the mechanism against handling shocks during integration.

Põhijooned

  • 750 GB capacity stores large data sets
  • 7200 RPM spindle speed delivers fast data access
  • 16 MB cache buffers frequent read and write operations
  • SATA 3.0 Gb/s interface enables high-throughput transfers
  • Perpendicular recording technology increases data density for greater reliability

Tehnilised andmed

BrandSeagate
SeriesBarraCuda 7200.10
ModelST3750640AS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity750GB
RPM7200 RPM
Cache16MB
Average Seek Time8.5ms
Average Write Time10ms
Average Latency4.16ms
FeaturesPerpendicular recording technology for maximum drive capacity and reliability
Ultra-fast performance
Superb reliability
Whisper-quiet operation
Enhanced G-Force Protection against handling damage
Clean Sweep calibration and Directed Offline scan diagnostics
RoHS (restriction of hazardous substances) compliant
UsageIdeal for Servers
Form Factor3.5"
Tarnekaal0.68 kg
Pakendi mõõtmed147 × 102 × 25 mm

Küsimused selle toote kohta

Does the bare drive include cables or mounting brackets, or must they be purchased separately?

The drive is supplied as a bare unit only; SATA data and power cables plus any mounting hardware need to be sourced separately.

Which capacity and speed variant of the BarraCuda 7200.10 series does this model represent?

This is the 750 GB version spinning at 7200 RPM with 16 MB cache and a SATA 3.0 Gb/s interface.

What does the 7200 RPM rating mean for everyday server workloads?

The 7200 RPM spindle speed combined with 8.5 ms average seek time and 4.16 ms latency delivers responsive performance for typical server read and write tasks.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.