Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Silver 3.5 inch bare SATA hard drive with circuit board visible

Seagate

Seagate ST3750640AS 750GB 7200 RPM 16MB SATA 3.0Gb/s 3.5" internal hard drive

SKU CH-JA19-J5SRH MPN ST3750640AS

A 750 GB desktop hard drive spinning at 7200 RPM with 16 MB cache and a SATA 3.0 Gb/s interface

  • PackagingBare Drive
  • InterfaceSATA 3.0Gb/s
  • Capacity750GB
  • RPM7200 RPM
  • Cache16MB
  • Average Seek Time8.5ms
  • 750 GB capacity stores large data sets
  • 7200 RPM spindle speed delivers fast data access
  • 16 MB cache buffers frequent read and write operations
  • SATA 3.0 Gb/s interface enables high-throughput transfers
  • Perpendicular recording technology increases data density for greater reliability

Desktop storage for servers and workstations

The Seagate BarraCuda 7200.10 ST3750640AS is a 750GB 3.5 inch internal hard drive that spins at 7200 RPM with a 16MB cache. It uses perpendicular recording technology to reach this capacity in the standard form factor and is described by the manufacturer as ideal for server environments.

Check your motherboard and cabling before ordering

The drive connects through a SATA 3.0Gb/s interface and requires a matching port and data cable on the host system. Verify that the BIOS or controller can address a 750GB volume and that the operating system can initialise a drive of this size without additional drivers.

Bare drive construction

Supplied without brackets, screws or cables, the unit is intended for installation into a 3.5 inch bay using standard mounting points. The SoftSonic motor keeps acoustic output low while Enhanced G-Force Protection helps defend the mechanism against handling shocks during integration.

Přednosti

  • 750 GB capacity stores large data sets
  • 7200 RPM spindle speed delivers fast data access
  • 16 MB cache buffers frequent read and write operations
  • SATA 3.0 Gb/s interface enables high-throughput transfers
  • Perpendicular recording technology increases data density for greater reliability

Specifikace

BrandSeagate
SeriesBarraCuda 7200.10
ModelST3750640AS
PackagingBare Drive
InterfaceSATA 3.0Gb/s
Capacity750GB
RPM7200 RPM
Cache16MB
Average Seek Time8.5ms
Average Write Time10ms
Average Latency4.16ms
FeaturesPerpendicular recording technology for maximum drive capacity and reliability
Ultra-fast performance
Superb reliability
Whisper-quiet operation
Enhanced G-Force Protection against handling damage
Clean Sweep calibration and Directed Offline scan diagnostics
RoHS (restriction of hazardous substances) compliant
UsageIdeal for Servers
Form Factor3.5"
Přepravní hmotnost0.68 kg
Rozměry balení147 × 102 × 25 mm

Otázky k tomuto produktu

Does the bare drive include cables or mounting brackets, or must they be purchased separately?

The drive is supplied as a bare unit only; SATA data and power cables plus any mounting hardware need to be sourced separately.

Which capacity and speed variant of the BarraCuda 7200.10 series does this model represent?

This is the 750 GB version spinning at 7200 RPM with 16 MB cache and a SATA 3.0 Gb/s interface.

What does the 7200 RPM rating mean for everyday server workloads?

The 7200 RPM spindle speed combined with 8.5 ms average seek time and 4.16 ms latency delivers responsive performance for typical server read and write tasks.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.