Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Rectangular E1.S 9.5mm SSD, silver label, edge connector visible

Solidigm

Solidigm D5-P5430 7.68TB E1.S 9.5mm PCIe 4.0 enterprise SSD (SBFPFUBU076TOP1)

SKU CH-HXCF-GGE9B MPN SBFPFUBU076TOP1

E1.S 9.5mm enterprise SSD with 7.68TB QLC NAND, PCIe 4.0 x4, 6600 MBps read and 0.58 DWPD endurance

  • Form FactorE1.S 9.5mm
  • Capacity7.68TB
  • Memory Components192L QLC 3D NAND
  • InterfacePCI-Express 4.0
  • Max Sequential ReadUp to 6600 MBps
  • Max Sequential WriteUp to 1800 MBps

Option 7.68TB E1.S Opal

Näita veel 14 konfiguratsiooni
  • High-capacity 7.68TB storage for dense server deployments
  • PCIe 4.0 x4 interface delivers up to 6600 MBps sequential read speed
  • 757000 IOPS random read accelerates read-heavy workloads
  • 192-layer QLC 3D NAND enables cost-efficient high capacity
  • 2000000-hour MTBF and 8.07 PBW endurance for reliable data-centre operation

Solidigm D5-P5430 7.68TB E1.S Enterprise SSD

The Solidigm D5-P5430 is a 7.68TB enterprise solid-state drive built for read-intensive data centre workloads. It uses 192-layer QLC 3D NAND and a PCIe 4.0 x4 interface in the E1.S 9.5mm form factor. The drive targets servers and storage arrays that need high capacity with consistent sequential read performance up to 6600 MBps.

Installation fits standard E1.S hot-plug bays

The drive slides into a compatible E1.S 9.5mm slot and locks with the built-in latch, drawing up to 15W active power and 5W idle. Ensure the backplane and firmware support PCIe 4.0 x4 signalling and the Opal security feature; mismatched firmware or an undersized power budget are the most common causes of detection failures.

0.58 DWPD endurance rating defines the write

At 0.58 drive writes per day, the 8.07 PBW total endurance suits read-heavy applications such as content delivery, warm storage or logging tiers. Workloads that exceed this write intensity will wear the QLC media faster than the rated 2,000,000-hour MTBF assumes, so calculate daily write volume before deployment.

Põhijooned

  • High-capacity 7.68TB storage for dense server deployments
  • PCIe 4.0 x4 interface delivers up to 6600 MBps sequential read speed
  • 757000 IOPS random read accelerates read-heavy workloads
  • 192-layer QLC 3D NAND enables cost-efficient high capacity
  • 2000000-hour MTBF and 8.07 PBW endurance for reliable data-centre operation

Tehnilised andmed

BrandSolidigm
ModelD5-P5430
Part NumberSBFPFUBU076TOP1
Form FactorE1.S 9.5mm
Capacity7.68TB
Memory Components192L QLC 3D NAND
InterfacePCI-Express 4.0
Max Sequential ReadUp to 6600 MBps
Max Sequential WriteUp to 1800 MBps
4KB Random Read757000 IOPS (4K, QD256)
4KB Random Write100000 IOPS (4K, QD256)
EnduranceUp to 0.58 DWPD / Up to 8.07 PBW
MTBF2,000,000 hours
SecurityOpal
Power Consumption (Idle)5W
Power Consumption (Active)15W
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight66.5g
Tarnekaal0.17 kg
Pakendi mõõtmed140 × 110 × 17 mm

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

How do I verify the D5-P5430 is delivering the rated 757000 IOPS random read after installation?

Run a 4K random read test at queue depth 256 using a tool such as fio or CrystalDiskMark and compare the result to the 757000 IOPS specification.

What ships with the SBFPFUBU076TOP1 and what must I source separately?

The single pack contains only the 7.68TB E1.S 9.5mm drive; you must supply a compatible E1.S backplane or carrier, PCIe 4.0 cabling, and mounting screws.

Which capacity of the D5-P5430 series should I choose for a read-heavy workload needing maximum endurance?

The 7.68TB model provides 0.58 DWPD and 8.07 PBW total bytes written, the highest endurance point in this series.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.