Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.

Seuratut tuotteet Kirjaudu sisään
Rectangular E1.S 9.5mm SSD, silver label, edge connector visible

Solidigm

Solidigm D5-P5430 7.68TB E1.S 9.5mm PCIe 4.0 enterprise SSD (SBFPFUBU076TOP1)

SKU CH-HXCF-GGE9B MPN SBFPFUBU076TOP1

E1.S 9.5mm enterprise SSD with 7.68TB QLC NAND, PCIe 4.0 x4, 6600 MBps read and 0.58 DWPD endurance

  • Form FactorE1.S 9.5mm
  • Capacity7.68TB
  • Memory Components192L QLC 3D NAND
  • InterfacePCI-Express 4.0
  • Max Sequential ReadUp to 6600 MBps
  • Max Sequential WriteUp to 1800 MBps

Option 7.68TB E1.S Opal

Näytä 14 muuta kokoonpanoa
  • High-capacity 7.68TB storage for dense server deployments
  • PCIe 4.0 x4 interface delivers up to 6600 MBps sequential read speed
  • 757000 IOPS random read accelerates read-heavy workloads
  • 192-layer QLC 3D NAND enables cost-efficient high capacity
  • 2000000-hour MTBF and 8.07 PBW endurance for reliable data-centre operation

Solidigm D5-P5430 7.68TB E1.S Enterprise SSD

The Solidigm D5-P5430 is a 7.68TB enterprise solid-state drive built for read-intensive data centre workloads. It uses 192-layer QLC 3D NAND and a PCIe 4.0 x4 interface in the E1.S 9.5mm form factor. The drive targets servers and storage arrays that need high capacity with consistent sequential read performance up to 6600 MBps.

Installation fits standard E1.S hot-plug bays

The drive slides into a compatible E1.S 9.5mm slot and locks with the built-in latch, drawing up to 15W active power and 5W idle. Ensure the backplane and firmware support PCIe 4.0 x4 signalling and the Opal security feature; mismatched firmware or an undersized power budget are the most common causes of detection failures.

0.58 DWPD endurance rating defines the write

At 0.58 drive writes per day, the 8.07 PBW total endurance suits read-heavy applications such as content delivery, warm storage or logging tiers. Workloads that exceed this write intensity will wear the QLC media faster than the rated 2,000,000-hour MTBF assumes, so calculate daily write volume before deployment.

Kohokohdat

  • High-capacity 7.68TB storage for dense server deployments
  • PCIe 4.0 x4 interface delivers up to 6600 MBps sequential read speed
  • 757000 IOPS random read accelerates read-heavy workloads
  • 192-layer QLC 3D NAND enables cost-efficient high capacity
  • 2000000-hour MTBF and 8.07 PBW endurance for reliable data-centre operation

Tekniset tiedot

BrandSolidigm
ModelD5-P5430
Part NumberSBFPFUBU076TOP1
Form FactorE1.S 9.5mm
Capacity7.68TB
Memory Components192L QLC 3D NAND
InterfacePCI-Express 4.0
Max Sequential ReadUp to 6600 MBps
Max Sequential WriteUp to 1800 MBps
4KB Random Read757000 IOPS (4K, QD256)
4KB Random Write100000 IOPS (4K, QD256)
EnduranceUp to 0.58 DWPD / Up to 8.07 PBW
MTBF2,000,000 hours
SecurityOpal
Power Consumption (Idle)5W
Power Consumption (Active)15W
Operating Temperature0°C ~ +70°C
Max Shock Resistance1,000 G (Max) at 0.5 msec
Max Vibration ResistanceOperating: 2.17 GRMS (5 - 700 Hz) Max
Non-Operating: 3.13 GRMS (5 - 800 Hz) Max
Weight66.5g
Lähetyspaino0.17 kg
Pakkauksen mitat140 × 110 × 17 mm

Tämän mallin muut versiot

5 lisää samasta mallistosta

Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.

Kysymyksiä tästä tuotteesta

How do I verify the D5-P5430 is delivering the rated 757000 IOPS random read after installation?

Run a 4K random read test at queue depth 256 using a tool such as fio or CrystalDiskMark and compare the result to the 757000 IOPS specification.

What ships with the SBFPFUBU076TOP1 and what must I source separately?

The single pack contains only the 7.68TB E1.S 9.5mm drive; you must supply a compatible E1.S backplane or carrier, PCIe 4.0 cabling, and mounting screws.

Which capacity of the D5-P5430 series should I choose for a read-heavy workload needing maximum endurance?

The 7.68TB model provides 0.58 DWPD and 8.07 PBW total bytes written, the highest endurance point in this series.

Myös tällä osastolla

Asiakkaat vertailivat myös näitä

Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.