Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Three 120 mm square fans, matte black frames, nine translucent blades each, ARGB lighting rings visible

Thermaltake

Thermaltake CL-F204-PL12SW-A LE120 ARGB PWM 120mm case fan 3-pack 500-1500 rpm 66.1 CFM

SKU CH-40AR-SWJVM MPN CL-F204-PL12SW-A

Three 120 mm fans with 9 addressable LEDs each, 500-1500 rpm PWM control, 66.1 CFM airflow and 1.41 mm-H₂O static pressure

  • TypeCase Fan
  • 9 blades push 66.1 CFM airflow for strong cooling
  • 500-1500 rpm PWM speed balances performance and noise
  • 9 addressable LEDs per fan enable 16.8 million colours
  • Daisy-chain ARGB cables simplify wiring inside the case
  • Included 3-way PWM splitter connects all three fans easily

Three-pack ARGB PWM case fans

The Thermaltake LE120 ARGB PWM fans arrive as a three-pack of 120 mm case fans designed for builders who want addressable lighting and speed control through a single motherboard header. Each unit uses a hydraulic bearing and nine blades to move air through a chassis. The bundled 3-way PWM splitter lets all three fans share one PWM header for synchronized speed curves.

Airflow up to 66.1 CFM

At the maximum 1500 rpm the trio can deliver up to 66.1 CFM of airflow with 1.41 mm-H₂O of static pressure, providing enough force for standard intake or exhaust positions in a typical mid-tower build. The minimum speed of 500 rpm keeps noise low during light workloads, but the fixed upper limit means dense radiator stacks or heavily restricted panels will see diminishing returns above that ceiling.

Daisy-chain ARGB cables

Nine addressable LEDs per fan connect via 3-pin 5 V ARGB headers that support daisy-chaining, so a single motherboard 5 V sync port can control the full 16.8 million-colour range across all three units. The supplied 3-way PWM splitter consolidates the four-pin power leads, reducing cable clutter and freeing headers for other devices. No separate lighting controller or additional software is required beyond the motherboard vendor’s 5 V sync utility.

Põhijooned

  • 9 blades push 66.1 CFM airflow for strong cooling
  • 500-1500 rpm PWM speed balances performance and noise
  • 9 addressable LEDs per fan enable 16.8 million colours
  • Daisy-chain ARGB cables simplify wiring inside the case
  • Included 3-way PWM splitter connects all three fans easily

Tehnilised andmed

TypeCase Fan
Tarnekaal0.50 kg
Pakendi mõõtmed146 × 127 × 83 mm

Küsimused selle toote kohta

Will the 3-pin 5V ARGB header and PWM splitter work with my existing motherboard?

Yes, the 3-pin 5V ARGB connector syncs with standard motherboard software and the included 3-way PWM splitter plugs into a single 4-pin fan header.

How can I confirm the fans run up to 1500 rpm and push 66.1 CFM after installing them?

Check fan speed in BIOS or monitoring software; you should see speeds scale between 500 and 1500 rpm under load.

Does the box include the daisy-chain ARGB cables and 3-way PWM splitter, or must I buy them separately?

The pack ships with all three fans, daisy-chain 3-pin 5V ARGB cables and the 3-way PWM splitter ready to install.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.