Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Three 120 mm square fans, matte black frames, nine translucent blades each, ARGB lighting rings visible

Thermaltake

Thermaltake CL-F204-PL12SW-A LE120 ARGB PWM 120mm case fan 3-pack 500-1500 rpm 66.1 CFM

SKU CH-40AR-SWJVM MPN CL-F204-PL12SW-A

Three 120 mm fans with 9 addressable LEDs each, 500-1500 rpm PWM control, 66.1 CFM airflow and 1.41 mm-H₂O static pressure

  • TypeCase Fan
  • 9 blades push 66.1 CFM airflow for strong cooling
  • 500-1500 rpm PWM speed balances performance and noise
  • 9 addressable LEDs per fan enable 16.8 million colours
  • Daisy-chain ARGB cables simplify wiring inside the case
  • Included 3-way PWM splitter connects all three fans easily

Three-pack ARGB PWM case fans

The Thermaltake LE120 ARGB PWM fans arrive as a three-pack of 120 mm case fans designed for builders who want addressable lighting and speed control through a single motherboard header. Each unit uses a hydraulic bearing and nine blades to move air through a chassis. The bundled 3-way PWM splitter lets all three fans share one PWM header for synchronized speed curves.

Airflow up to 66.1 CFM

At the maximum 1500 rpm the trio can deliver up to 66.1 CFM of airflow with 1.41 mm-H₂O of static pressure, providing enough force for standard intake or exhaust positions in a typical mid-tower build. The minimum speed of 500 rpm keeps noise low during light workloads, but the fixed upper limit means dense radiator stacks or heavily restricted panels will see diminishing returns above that ceiling.

Daisy-chain ARGB cables

Nine addressable LEDs per fan connect via 3-pin 5 V ARGB headers that support daisy-chaining, so a single motherboard 5 V sync port can control the full 16.8 million-colour range across all three units. The supplied 3-way PWM splitter consolidates the four-pin power leads, reducing cable clutter and freeing headers for other devices. No separate lighting controller or additional software is required beyond the motherboard vendor’s 5 V sync utility.

Přednosti

  • 9 blades push 66.1 CFM airflow for strong cooling
  • 500-1500 rpm PWM speed balances performance and noise
  • 9 addressable LEDs per fan enable 16.8 million colours
  • Daisy-chain ARGB cables simplify wiring inside the case
  • Included 3-way PWM splitter connects all three fans easily

Specifikace

TypeCase Fan
Přepravní hmotnost0.50 kg
Rozměry balení146 × 127 × 83 mm

Otázky k tomuto produktu

Will the 3-pin 5V ARGB header and PWM splitter work with my existing motherboard?

Yes, the 3-pin 5V ARGB connector syncs with standard motherboard software and the included 3-way PWM splitter plugs into a single 4-pin fan header.

How can I confirm the fans run up to 1500 rpm and push 66.1 CFM after installing them?

Check fan speed in BIOS or monitoring software; you should see speeds scale between 500 and 1500 rpm under load.

Does the box include the daisy-chain ARGB cables and 3-way PWM splitter, or must I buy them separately?

The pack ships with all three fans, daisy-chain 3-pin 5V ARGB cables and the 3-way PWM splitter ready to install.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.