Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Rectangular black metal PSU, 140mm deep, 120mm fan grille, modular cable sockets visible

Thermaltake

Thermaltake Toughpower PF1 750W 80+ Platinum Full Modular Power Supply PS-TPD-0750FNFAPU-1

SKU CH-0C4G-7N20X MPN PS-TPD-0750FNFAPU-1

A 750W fully modular ATX power supply with 80 Plus Platinum efficiency, a 120mm hydraulic-bearing fan, single +12V rail, compact 140mm depth and Japanese 105°C capacitors

  • TypeATX12V / EPS12V
  • Maximum Power750 W
  • Fans120mm Hydraulic Bearing Fan
  • PFCActive
  • Main Connector24Pin
  • +12V RailsSingle
  • Platinum efficiency up to 92% cuts running costs
  • Compact 140mm depth frees space for cable routing
  • Fully modular flat black cables simplify build tidiness
  • Japanese 105°C capacitors ensure long-term reliability
  • Hydraulic bearing fan runs ultra quiet with smart zero mode

Thermaltake Toughpower PF1 750W Platinum PSU

This 750W ATX12V unit delivers 80 PLUS Platinum efficiency up to 92%. A compact 140mm depth and single-sided SMD layout keep cable routing tidy. Fully modular flat black cables and 100% Japanese 105°C capacitors ensure clean builds and long-term reliability.

Suits builders needing Platinum efficiency

The 140mm length fits tight chassis where longer units block drive bays or radiators. Four 6+2-pin PCIe connectors handle dual-GPU setups, while nine SATA plugs serve large storage arrays. Systems requiring more than 750W should consider higher-capacity models.

140mm depth decides fit in compact builds

At 140mm deep the PSU leaves room behind the motherboard tray for cable bends and airflow. Verify your case specification accepts this length before ordering. The single +12V rail and DC-to-DC design provide stable power once installed.

Põhijooned

  • Platinum efficiency up to 92% cuts running costs
  • Compact 140mm depth frees space for cable routing
  • Fully modular flat black cables simplify build tidiness
  • Japanese 105°C capacitors ensure long-term reliability
  • Hydraulic bearing fan runs ultra quiet with smart zero mode

Tehnilised andmed

BrandThermaltake
SeriesToughpower PF1 750W
ModelPS-TPD-0750FNFAPU-1
TypeATX12V / EPS12V
Maximum Power750 W
Fans120mm Hydraulic Bearing Fan
PFCActive
Main Connector24Pin
+12V RailsSingle
PCI-Express Connector4 x 6+2-Pin
SATA Power Connector9
Max PSU Length140 mm
ModularFull Modular
Power Good Signal100-500ms
Hold-up Time> 16msec at 100% of full load
Energy-Efficient80 PLUS PLATINUM Certified
PSU Noise LevelCybenetics A-
ProtectionOCP, OVP, UVP, OPP, SCP, OTP
Input Voltage100 - 240 V
Input Frequency Range50/60 Hz
Input Current10A
Output+3.3V@20A, +5V@20A, +12V@62A, [email protected] , [email protected]
MTBF>120,000 Hours
ApprovalsCE / UL / TÜV / FCC / BSMI / CCC / EAC certifications
Connectors1 xMain Power Connector (24pin)
2 x ATX 12V / EPS 12V (4+4pin)
9 x SATA (5pin)
4 x PCI-E (6+2pin)
4 x Peripheral (4pin)
1 x Floppy
Features80 Plus Platinum Certified
Compact 140mm Depth Design
Fully modular low-profile flat black cables
100% high quality Japanese 105°C/221°F capacitors
High amperage single +12V rail & DC to DC design
<30mV low ripple noise design
Extremely strict voltage regulation <+/-2%
Intel C6/C7 States & ERP ready
Warranty: 10 Years
Dimensions3.39" x 5.91" x 5.51"
Tarnekaal2.77 kg
Pakendi mõõtmed320 × 221 × 135 mm

Küsimused selle toote kohta

What case clearance do I need for the 140 mm depth of this PSU?

The unit is 140 mm deep, so your case must provide at least that much clear space behind the motherboard tray for the power supply to fit.

Will the single +12V rail and DC-to-DC design work with older components that expect multi-rail layouts?

Yes, the single high-amperage +12V rail with DC-to-DC conversion delivers stable power to legacy parts without the cross-load issues sometimes seen on multi-rail units.

How can I confirm the fan is running only when needed after I build the system?

The Smart Zero Fan mode keeps the 120 mm hydraulic-bearing fan off at low loads; you will hear it spin up only when internal temperature or load crosses the built-in threshold.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.