Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse

Vetroo

Vetroo CF120 5-pack 120 mm ARGB case fans

SKU CH-ESSX-BS8MP MPN CF120

Five 120 mm ARGB case fans with hydro bearings, 48.1 CFM maximum airflow and 20–32 dBA noise

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeHydro Bearing
  • RPM<1600 RPM
  • Air Flow45-50 CFM
  • Power Connector3 / 4 Pin

Color Blue

Option 5 Packs

  • ARGB sync via 5 V 3-pin header for custom colours
  • Hydro bearing rated 20 000 hours for long life
  • 1 CFM max airflow at 1 300 RPM for strong cooling
  • 20–32 dBA noise range keeps system quiet
  • Hidden-screw frame gives a clean, elegant look

Five-fan ARGB cooling kit

This five-pack supplies 120 mm addressable RGB fans with blue frames for builders who want coordinated lighting across a case, radiator or CPU cooler. Hydrodynamic bearings and a 1300 RPM speed range deliver 48.1 CFM maximum airflow while keeping noise between 20 and 32 dBA. Each unit draws 4.2 W at 12 V and connects via standard 3-pin or 4-pin headers. The bundle includes twenty mounting screws for quick installation.

Replaces single-fan or non-ARGB setups

Upgrading from a solitary exhaust fan or fixed-colour LEDs is worthwhile when you need balanced intake and exhaust paths plus motherboard-synchronised lighting. The 5 V 3-pin ARGB header ties colour effects to the board’s controller without a separate box, while the 4-pin PWM line lets the BIOS adjust speed under load. Builds that already run a full complement of matched fans will not gain additional coverage from this kit.

Handles mid-range thermal loads with headroom

At 48.1 CFM the array moves enough air for typical gaming CPUs and mainstream graphics cards, and the 20 000-hour bearing rating supports continuous operation. Noise stays low at idle and remains acceptable at full speed, but extreme overclocks or multi-GPU configurations that demand higher static pressure will exceed what these blades can sustain.

Põhijooned

  • ARGB sync via 5 V 3-pin header for custom colours
  • Hydro bearing rated 20 000 hours for long life
  • 1 CFM max airflow at 1 300 RPM for strong cooling
  • 20–32 dBA noise range keeps system quiet
  • Hidden-screw frame gives a clean, elegant look

Tehnilised andmed

BrandVetroo
SeriesCF120
ModelMacaron
TypeCase Fan
CompatibilityCase
Bearing TypeHydro Bearing
RPM<1600 RPM
Air Flow45-50 CFM
Power Connector3 / 4 Pin
ColorBlue
LEDARGB
Dimensions120 *25 *120 MM

Selle mudeli teised versioonid

5 veel samast sarjast

Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.

Küsimused selle toote kohta

What clearance does the 25 mm thick CF120 need inside a 120 mm mount?

The fan is 120 × 25 × 120 mm and uses standard 120 mm screw holes, so it fits any case or radiator designed for 120 mm fans with 25 mm depth.

How do I connect the 3-pin ARGB and 4-pin PWM cables to get both lighting sync and speed control?

Plug the 5 V 3-pin ARGB lead into the motherboard’s addressable RGB header and the 4-pin PWM lead into a CPU or chassis fan header; the fans draw 12 V / 0.2 A each.

When should I expect to replace the hydraulic-bearing fans rated for 20000 hours?

At 20 000 hours rated life the bearings are the only wear item; clean dust from the seven blades periodically and plan replacement once noise or vibration rises.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.