Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.

Árfigyelő lista Bejelentkezés

Vetroo

Vetroo CF120 5-pack 120 mm ARGB case fans

SKU CH-ESSX-BS8MP MPN CF120

Five 120 mm ARGB case fans with hydro bearings, 48.1 CFM maximum airflow and 20–32 dBA noise

  • TypeCase Fan
  • CompatibilityCase
  • Bearing TypeHydro Bearing
  • RPM<1600 RPM
  • Air Flow45-50 CFM
  • Power Connector3 / 4 Pin

Color Blue

Option 5 Packs

  • ARGB sync via 5 V 3-pin header for custom colours
  • Hydro bearing rated 20 000 hours for long life
  • 1 CFM max airflow at 1 300 RPM for strong cooling
  • 20–32 dBA noise range keeps system quiet
  • Hidden-screw frame gives a clean, elegant look

Five-fan ARGB cooling kit

This five-pack supplies 120 mm addressable RGB fans with blue frames for builders who want coordinated lighting across a case, radiator or CPU cooler. Hydrodynamic bearings and a 1300 RPM speed range deliver 48.1 CFM maximum airflow while keeping noise between 20 and 32 dBA. Each unit draws 4.2 W at 12 V and connects via standard 3-pin or 4-pin headers. The bundle includes twenty mounting screws for quick installation.

Replaces single-fan or non-ARGB setups

Upgrading from a solitary exhaust fan or fixed-colour LEDs is worthwhile when you need balanced intake and exhaust paths plus motherboard-synchronised lighting. The 5 V 3-pin ARGB header ties colour effects to the board’s controller without a separate box, while the 4-pin PWM line lets the BIOS adjust speed under load. Builds that already run a full complement of matched fans will not gain additional coverage from this kit.

Handles mid-range thermal loads with headroom

At 48.1 CFM the array moves enough air for typical gaming CPUs and mainstream graphics cards, and the 20 000-hour bearing rating supports continuous operation. Noise stays low at idle and remains acceptable at full speed, but extreme overclocks or multi-GPU configurations that demand higher static pressure will exceed what these blades can sustain.

Erősségek

  • ARGB sync via 5 V 3-pin header for custom colours
  • Hydro bearing rated 20 000 hours for long life
  • 1 CFM max airflow at 1 300 RPM for strong cooling
  • 20–32 dBA noise range keeps system quiet
  • Hidden-screw frame gives a clean, elegant look

Műszaki adatok

BrandVetroo
SeriesCF120
ModelMacaron
TypeCase Fan
CompatibilityCase
Bearing TypeHydro Bearing
RPM<1600 RPM
Air Flow45-50 CFM
Power Connector3 / 4 Pin
ColorBlue
LEDARGB
Dimensions120 *25 *120 MM

A modell további verziói

5 további ebben a termékcsaládban

Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.

Kérdések a termékről

What clearance does the 25 mm thick CF120 need inside a 120 mm mount?

The fan is 120 × 25 × 120 mm and uses standard 120 mm screw holes, so it fits any case or radiator designed for 120 mm fans with 25 mm depth.

How do I connect the 3-pin ARGB and 4-pin PWM cables to get both lighting sync and speed control?

Plug the 5 V 3-pin ARGB lead into the motherboard’s addressable RGB header and the 4-pin PWM lead into a CPU or chassis fan header; the fans draw 12 V / 0.2 A each.

When should I expect to replace the hydraulic-bearing fans rated for 20000 hours?

At 20 000 hours rated life the bearings are the only wear item; clean dust from the seven blades periodically and plan replacement once noise or vibration rises.

Szintén ezen a polcon

Vásárlók ezeket hasonlították össze

Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.