Vetroo CF120 120mm ARGB case fan 1300 RPM 48.1 CFM yellow frame
- 1 Fan
- Case Fan
Elfogadjuk a kriptovalutát — így az Ön birtokában lévő érmékből valódi hardvert vásárolhat.Fizessen kriptóval, és költse el valódi hardverre. 399 $ felett világszerte díjmentes a biztosított szállítás. Egyszerű, jelöletlen külső kartonok, Németországból küldve.399 $ felett díjmentes a biztosított szállítás. Az Ön árfolyama a pénztár megnyitásától számított 30 percre zárolva marad.Árfolyam zárolva 30 percre. Minden termék gyárilag zárt, sorozatszáma ellenőrzött, és 24 hónapos garancia fedezi.Zárt csomagolás, 24 hónap garancia.
Vetroo
A 120 mm case fan with hydro bearing, 1300 RPM and 48.1 CFM airflow, addressable RGB lighting and a blue frame
The Vetroo CF120 is a 120 mm case fan finished in a pastel blue Macaron colourway with addressable RGB lighting. It targets builders who want a coordinated colour theme and motherboard-synchronised lighting without adding a separate controller. The single-fan kit includes four mounting screws for standard case or radiator positions.
At 1300 RPM ± 10 % the fan delivers up to 48.1 CFM of airflow while the hydro bearing keeps operating noise low. Rated power draw is 4.2 W at 12 V with a current of 0.2 A, so the load on a standard fan header or PSU connection is minimal. The bearing is rated for up to 50000 hours of continuous running.
A hidden-screw design leaves the frame surface flat for a clean interior look. The fan ships with both a 3-pin 5 V ARGB header for motherboard lighting control and a 4-pin connector for power from the power supply. This split wiring lets lighting and speed run independently without an extra powered hub.
| Brand | Vetroo |
|---|---|
| Series | CF120 |
| Model | Macaron |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | <1600 RPM |
| Air Flow | 45-50 CFM |
| Power Connector | 3 / 4 Pin |
| Color | Blue |
| LED | ARGB |
| Dimensions | 120 *25 *120 MM |
A modell további verziói
Ugyanaz a termékcsalád, eltérő memória, hűtés vagy órajel — hasonlítsa össze, mielőtt dönt.
Mount the fan using the four included screws through the hidden screw holes on the 120 mm frame. Plug the 3-pin ARGB lead into the motherboard 5 V addressable header and the 4-pin power lead into a PSU Molex connector; the fan runs at 1300 RPM from the PSU while lighting is controlled by the board.
The hydro bearing is rated for 50 000 hours of operation. No lubrication or user service is required; simply clean dust from the seven blades periodically. Replace the fan if noise increases or airflow drops noticeably after that rated lifespan.
The hard limit is the 1 600 RPM ceiling — the fan will not spin faster even if voltage rises. At the nominal 1 300 RPM it delivers 48.1 CFM maximum airflow, so sustained thermal load is capped by that airflow figure rather than by bearing wear or power draw.
Szintén ezen a polcon
Ugyanaz a polc, ugyanaz a pénztár — nyolc pénznem és 30 perces árfolyamzár.
Amivel fizet, és amiben az árakat olvassa.
A pénztárnál küldi el a tárcájából
Csak tájékoztató jellegű — a katalógus dollárban van árazva
Nincs ilyen pénznem.
Válassza ki, milyen nyelven szóljon Önhöz az oldal.
Nincs egyező nyelv.
Először jár itt?
Már van fiókja?
Nincs automatikus visszaállítás: ez a bolt nem küld e-mailt, tehát nincs kérhető egyszer használatos link. Hagyja meg a fiókhoz tartozó címet, azt valaki kézzel átnézi.
Kérés rögzítve
Semmi nem érkezik a postafiókjába — ez a bolt egyáltalán nem küld e-mailt. Ezeket valaki kézzel intézi.
Eszébe jutott?