Vetroo CF120 120mm ARGB case fan 1300 RPM 48.1 CFM yellow frame
- 1 Fan
- Case Fan
Hyväksymme kryptoa — hallussasi olevat kolikot voivat näin ostaa oikeaa laitteistoa.Maksa kryptolla, käytä se oikeaan laitteistoon. Ilmainen vakuutettu toimitus maailmanlaajuisesti yli 399 $. Neutraalit, tuotemerkittömät ulkopakkaukset, lähetetään Saksasta.Ilmainen vakuutettu toimitus yli 399 $. Kurssisi lukitaan 30 minuutiksi heti, kun kassa avautuu.Kurssi lukittu 30 minuutiksi. Jokainen tuote on sinetöity, sen sarjanumero on tarkistettu, ja sillä on 24 kuukauden takuu.Sinetöity, 24 kuukauden takuu.
Vetroo
A 120 mm case fan with hydro bearing, 1300 RPM and 48.1 CFM airflow, addressable RGB lighting and a blue frame
The Vetroo CF120 is a 120 mm case fan finished in a pastel blue Macaron colourway with addressable RGB lighting. It targets builders who want a coordinated colour theme and motherboard-synchronised lighting without adding a separate controller. The single-fan kit includes four mounting screws for standard case or radiator positions.
At 1300 RPM ± 10 % the fan delivers up to 48.1 CFM of airflow while the hydro bearing keeps operating noise low. Rated power draw is 4.2 W at 12 V with a current of 0.2 A, so the load on a standard fan header or PSU connection is minimal. The bearing is rated for up to 50000 hours of continuous running.
A hidden-screw design leaves the frame surface flat for a clean interior look. The fan ships with both a 3-pin 5 V ARGB header for motherboard lighting control and a 4-pin connector for power from the power supply. This split wiring lets lighting and speed run independently without an extra powered hub.
| Brand | Vetroo |
|---|---|
| Series | CF120 |
| Model | Macaron |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | <1600 RPM |
| Air Flow | 45-50 CFM |
| Power Connector | 3 / 4 Pin |
| Color | Blue |
| LED | ARGB |
| Dimensions | 120 *25 *120 MM |
Tämän mallin muut versiot
Sama tuoteperhe, eri muisti, jäähdytin tai kellotaajuus — vertaile ennen päätöstä.
Mount the fan using the four included screws through the hidden screw holes on the 120 mm frame. Plug the 3-pin ARGB lead into the motherboard 5 V addressable header and the 4-pin power lead into a PSU Molex connector; the fan runs at 1300 RPM from the PSU while lighting is controlled by the board.
The hydro bearing is rated for 50 000 hours of operation. No lubrication or user service is required; simply clean dust from the seven blades periodically. Replace the fan if noise increases or airflow drops noticeably after that rated lifespan.
The hard limit is the 1 600 RPM ceiling — the fan will not spin faster even if voltage rises. At the nominal 1 300 RPM it delivers 48.1 CFM maximum airflow, so sustained thermal load is capped by that airflow figure rather than by bearing wear or power draw.
Myös tällä osastolla
Sama osasto, sama kassa — kahdeksan kryptovaluuttaa ja 30 minuutin kurssilukko.
Valuutta, jolla maksetaan, sekä valuutta, jossa hinnat näytetään.
Lähetetään lompakostasi kassalla
Vain näyttöä varten — hinnat ovat Yhdysvaltain dollareissa
Valuuttaa ei löytynyt.
Valitse kieli, jolla sivusto puhuu sinulle.
Ei vastaavaa kieltä.
Uusi täällä?
Onko sinulla jo tili?
Automaattista palautusta ei ole: kauppa ei lähetä sähköpostia lainkaan, joten kertakäyttöistä linkkiä ei ole mistä pyytää. Jätä osoite tilille, niin se käsitellään käsin.
Pyyntö kirjattu
Mikään ei ole tulossa sähköpostiisi — tämä kauppa ei lähetä sähköpostia lainkaan. Joku käsittelee nämä pyynnöt käsin.
Muistitko sen?