Vetroo CF120 120mm ARGB case fan 1300 RPM 48.1 CFM yellow frame
- 1 Fan
- Case Fan
Mēs pieņemam kriptovalūtu — lai tā, kas Jums pieder, varētu nopirkt īstu aparatūru.Maksājiet kriptovalūtā, iztērējiet to īstai aparatūrai. Bezmaksas apdrošināta piegāde visā pasaulē virs 399 $. Vienkāršas, nemarķētas kastes, sūtītas no Vācijas.Bezmaksas apdrošināta piegāde virs 399 $. Jūsu kurss tiek fiksēts uz 30 minūtēm, tiklīdz atveras kase.Kurss fiksēts uz 30 minūtēm. Katra prece ir aizzīmogota, tās sērijas numurs ir pārbaudīts, un uz to attiecas 24 mēnešu garantija.Aizzīmogots, 24 mēnešu garantija.
Vetroo
A 120 mm case fan with hydro bearing, 1300 RPM and 48.1 CFM airflow, addressable RGB lighting and a blue frame
The Vetroo CF120 is a 120 mm case fan finished in a pastel blue Macaron colourway with addressable RGB lighting. It targets builders who want a coordinated colour theme and motherboard-synchronised lighting without adding a separate controller. The single-fan kit includes four mounting screws for standard case or radiator positions.
At 1300 RPM ± 10 % the fan delivers up to 48.1 CFM of airflow while the hydro bearing keeps operating noise low. Rated power draw is 4.2 W at 12 V with a current of 0.2 A, so the load on a standard fan header or PSU connection is minimal. The bearing is rated for up to 50000 hours of continuous running.
A hidden-screw design leaves the frame surface flat for a clean interior look. The fan ships with both a 3-pin 5 V ARGB header for motherboard lighting control and a 4-pin connector for power from the power supply. This split wiring lets lighting and speed run independently without an extra powered hub.
| Brand | Vetroo |
|---|---|
| Series | CF120 |
| Model | Macaron |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | <1600 RPM |
| Air Flow | 45-50 CFM |
| Power Connector | 3 / 4 Pin |
| Color | Blue |
| LED | ARGB |
| Dimensions | 120 *25 *120 MM |
Citas šī modeļa versijas
Viena saime, taču atšķirīga atmiņa, dzesētājs vai frekvence — salīdziniet, pirms izlemjat.
Mount the fan using the four included screws through the hidden screw holes on the 120 mm frame. Plug the 3-pin ARGB lead into the motherboard 5 V addressable header and the 4-pin power lead into a PSU Molex connector; the fan runs at 1300 RPM from the PSU while lighting is controlled by the board.
The hydro bearing is rated for 50 000 hours of operation. No lubrication or user service is required; simply clean dust from the seven blades periodically. Replace the fan if noise increases or airflow drops noticeably after that rated lifespan.
The hard limit is the 1 600 RPM ceiling — the fan will not spin faster even if voltage rises. At the nominal 1 300 RPM it delivers 48.1 CFM maximum airflow, so sustained thermal load is capped by that airflow figure rather than by bearing wear or power draw.
Arī šajā sadaļā
Tas pats plaukts, tā pati kase — astoņas kriptovalūtas un kursa fiksēšana uz 30 minūtēm.
Kriptovalūta, kurā maksājat, un valūta, kurā redzat cenas.
Nosūtīts no Jūsu maciņa, noformējot pasūtījumu
Tikai informatīvi — katalogā cenas norādītas ASV dolāros
Neviena valūta neatbilst.
Izvēlieties valodu, kurā vietne sarunājas ar Jums.
Neviena valoda neatbilst.
Pirmo reizi šeit?
Jau ir konts?
Automātiskas atiestatīšanas nav: šis veikals nesūta e-pastus, tāpēc nav arī vienreizējas saites, ko pieprasīt. Atstājiet adresi kontā, un tā tiks apstrādāta manuāli.
Pieprasījums saņemts
Uz Jūsu e-pastu nekas neatnāks — šis veikals vispār nesūta e-pastus. Kāds šos pieprasījumus apstrādā manuāli.
Atcerējāties?