We take cryptocurrency — so the coins you hold can buy real hardware.Pay in crypto, spend it on real hardware. Free insured shipping worldwide over $399. Plain, unbranded boxes, sent from Germany.Free insured shipping over $399. Your rate is locked for 30 minutes once checkout opens.Rate locked 30 minutes. Every item sealed, serial-checked and covered by a 24-month warranty.Sealed, 24-month warranty.

Saved items Sign in
Blue 120mm square frame case fan with ARGB lighting and hidden screws

Vetroo

Vetroo CF120 120mm case fan 1300 RPM 48.1 CFM ARGB blue

SKU CH-F8ED-53WXE MPN CF120

A 120 mm case fan with hydro bearing, 1300 RPM and 48.1 CFM airflow, addressable RGB lighting and a blue frame

  • Fan Counts1 Fan
  • TypeCase Fan
  • CompatibilityCase
  • Fan Thickness25mm
  • Bearing TypeHydro Bearing
  • RPM<1600 RPM

Color Blue

Option 1 Pack

  • ARGB lighting syncs with 5V motherboard headers
  • Hydro bearing rated for 50000 hours quiet operation
  • 1300 RPM delivers 48.1 CFM maximum airflow
  • Hidden screw design creates clean interior aesthetics
  • 3-pin and 4-pin connectors for flexible installation

Macaron Blue ARGB Case Fan

The Vetroo CF120 is a 120 mm case fan finished in a pastel blue Macaron colourway with addressable RGB lighting. It targets builders who want a coordinated colour theme and motherboard-synchronised lighting without adding a separate controller. The single-fan kit includes four mounting screws for standard case or radiator positions.

1300 RPM Hydro Bearing Thermals

At 1300 RPM ± 10 % the fan delivers up to 48.1 CFM of airflow while the hydro bearing keeps operating noise low. Rated power draw is 4.2 W at 12 V with a current of 0.2 A, so the load on a standard fan header or PSU connection is minimal. The bearing is rated for up to 50000 hours of continuous running.

Hidden Screw Dual Connector Build

A hidden-screw design leaves the frame surface flat for a clean interior look. The fan ships with both a 3-pin 5 V ARGB header for motherboard lighting control and a 4-pin connector for power from the power supply. This split wiring lets lighting and speed run independently without an extra powered hub.

Highlights

  • ARGB lighting syncs with 5V motherboard headers
  • Hydro bearing rated for 50000 hours quiet operation
  • 1300 RPM delivers 48.1 CFM maximum airflow
  • Hidden screw design creates clean interior aesthetics
  • 3-pin and 4-pin connectors for flexible installation

Specifications

BrandVetroo
SeriesCF120
ModelMacaron
Fan Counts1 Fan
TypeCase Fan
CompatibilityCase
Fan Thickness25mm
Bearing TypeHydro Bearing
RPM<1600 RPM
Air Flow45-50 CFM
Power Connector3 / 4 Pin
ColorBlue
LEDARGB
Dimensions120 *25 *120 MM

Other versions of this model

5 more in the same range

Same family, different memory, cooler or clock — compare before you commit.

Questions about this item

How do I install the Vetroo CF120 fan and connect its 3-pin and 4-pin connectors correctly?

Mount the fan using the four included screws through the hidden screw holes on the 120 mm frame. Plug the 3-pin ARGB lead into the motherboard 5 V addressable header and the 4-pin power lead into a PSU Molex connector; the fan runs at 1300 RPM from the PSU while lighting is controlled by the board.

What maintenance will the CF120 need and when should I expect to replace it?

The hydro bearing is rated for 50 000 hours of operation. No lubrication or user service is required; simply clean dust from the seven blades periodically. Replace the fan if noise increases or airflow drops noticeably after that rated lifespan.

What is the first limit I will hit when running the CF120 continuously at full speed?

The hard limit is the 1 600 RPM ceiling — the fan will not spin faster even if voltage rises. At the nominal 1 300 RPM it delivers 48.1 CFM maximum airflow, so sustained thermal load is capped by that airflow figure rather than by bearing wear or power draw.

Also in this aisle

People compared these

Same shelf, same checkout — eight coins and a 30-minute rate lock.