Vetroo CF120 120mm ARGB case fan 1300 RPM 48.1 CFM yellow frame
- 1 Fan
- Case Fan
Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.
Vetroo
A 120 mm case fan with hydro bearing, 1300 RPM and 48.1 CFM airflow, addressable RGB lighting and a blue frame
The Vetroo CF120 is a 120 mm case fan finished in a pastel blue Macaron colourway with addressable RGB lighting. It targets builders who want a coordinated colour theme and motherboard-synchronised lighting without adding a separate controller. The single-fan kit includes four mounting screws for standard case or radiator positions.
At 1300 RPM ± 10 % the fan delivers up to 48.1 CFM of airflow while the hydro bearing keeps operating noise low. Rated power draw is 4.2 W at 12 V with a current of 0.2 A, so the load on a standard fan header or PSU connection is minimal. The bearing is rated for up to 50000 hours of continuous running.
A hidden-screw design leaves the frame surface flat for a clean interior look. The fan ships with both a 3-pin 5 V ARGB header for motherboard lighting control and a 4-pin connector for power from the power supply. This split wiring lets lighting and speed run independently without an extra powered hub.
| Brand | Vetroo |
|---|---|
| Series | CF120 |
| Model | Macaron |
| Fan Counts | 1 Fan |
| Type | Case Fan |
| Compatibility | Case |
| Fan Thickness | 25mm |
| Bearing Type | Hydro Bearing |
| RPM | <1600 RPM |
| Air Flow | 45-50 CFM |
| Power Connector | 3 / 4 Pin |
| Color | Blue |
| LED | ARGB |
| Dimensions | 120 *25 *120 MM |
Další verze tohoto modelu
Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.
Mount the fan using the four included screws through the hidden screw holes on the 120 mm frame. Plug the 3-pin ARGB lead into the motherboard 5 V addressable header and the 4-pin power lead into a PSU Molex connector; the fan runs at 1300 RPM from the PSU while lighting is controlled by the board.
The hydro bearing is rated for 50 000 hours of operation. No lubrication or user service is required; simply clean dust from the seven blades periodically. Replace the fan if noise increases or airflow drops noticeably after that rated lifespan.
The hard limit is the 1 600 RPM ceiling — the fan will not spin faster even if voltage rises. At the nominal 1 300 RPM it delivers 48.1 CFM maximum airflow, so sustained thermal load is capped by that airflow figure rather than by bearing wear or power draw.
Také v této kategorii
Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.
Měna, ve které platíte, a měna, ve které se zobrazují ceny.
Odesláno z vaší peněženky u pokladny
Pouze pro zobrazení — katalog je veden v dolarech
Žádná měna neodpovídá.
Vyberte jazyk, ve kterém s vámi bude web komunikovat.
Žádný jazyk neodpovídá.
Poprvé tady?
Už účet máte?
Neexistuje žádná automatická obnova hesla: tento obchod neposílá žádné e-maily, takže neexistuje jednorázový odkaz, o který by bylo možné požádat. Nechte adresu uvedenou u účtu, vyřídíme ji ručně.
Žádost zaznamenána
Do vaší schránky nic nedorazí — tento obchod neposílá žádné e-maily. Někdo se o to postará ručně.
Vzpomněli jste si?