Přijímáme kryptoměny — takže to, co držíte, můžete utratit za skutečný hardware.Plaťte kryptem, utrácejte ho za skutečný hardware. Pojištěná doprava zdarma po celém světě nad 399 $. Neutrální přepravní krabice bez loga, odesílané z Německa.Pojištěná doprava zdarma nad 399 $. Jakmile se otevře pokladna, je váš kurz zablokovaný na 30 minut.Kurz zablokovaný na 30 minut. Každý výrobek je zapečetěný, jeho sériové číslo je zkontrolované a vztahuje se na něj 24měsíční záruka.Zapečetěno, záruka 24 měsíců.

Sledované položky Přihlásit se
Clear flexible PVC tubing coil, smooth transparent walls

ModMyMods

ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling

SKU CH-9XH5-4MFW4 MPN MOD-0002

Clear PVC tubing with smooth walls for optimal water flow in custom liquid-cooling loops, compatible with compression and barb fittings and sold by the foot

  • Color/FinishClear

Color Clear

  • Black
  • Clear

Přeškrtnuté varianty existují, ale zde nejsou skladem.

  • Smooth inner walls reduce flow resistance for efficient cooling
  • Flexible PVC connects easily to both compression and barb fittings
  • Durable construction resists wear and breakdown over years of use
  • Manufactured locally in western New York for quality control
  • Sold by the foot so you buy the exact length needed

Tubing for custom water loops

ModMyMods MOD-0002 is clear flexible PVC tubing sized at 3/8 inch inner diameter and 1/2 inch outer diameter. It is sold by the foot so buyers can order the exact length their loop requires. The smooth bore reduces flow restriction and the material works with both compression and barb fittings.

Suits builders assembling a custom liquid-cooling

This tubing fits systems that use 3/8 inch ID and 1/2 inch OD dimensions. It is not intended for loops that require a different inner or outer diameter, nor for builders who need pre-cut lengths or coloured tubing.

Inner and outer diameter

The 3/8 inch ID and 1/2 inch OD determine whether the tubing matches the fittings and components in the loop. Buyers must verify these dimensions against their water blocks, radiators and fittings before ordering.

Přednosti

  • Smooth inner walls reduce flow resistance for efficient cooling
  • Flexible PVC connects easily to both compression and barb fittings
  • Durable construction resists wear and breakdown over years of use
  • Manufactured locally in western New York for quality control
  • Sold by the foot so you buy the exact length needed

Specifikace

Color/FinishClear
BrandModMyMods
ModelMOD-0002
Part NumberMOD-0002

Další verze tohoto modelu

Dalších 1 v této řadě

Stejná řada, jiná paměť, chladič nebo takt — porovnejte, než se rozhodnete.

Otázky k tomuto produktu

What inner diameter does the MOD-0002 tubing use for water-cooling loops?

The tubing has a 3/8 inch inner diameter and 1/2 inch outer diameter, so it fits standard 3/8 ID compression or barb fittings.

How much tubing do I receive when I order multiple quantities?

Each quantity equals one continuous foot; ordering five gives a single five-foot length, not five separate one-foot pieces.

How should I cut and fit the tubing to avoid leaks on compression fittings?

Cut the tube square with a sharp blade, slide the compression nut and olive on first, then push the tube fully onto the barb before tightening the nut.

Také v této kategorii

Zákazníci také porovnávali

Stejná kategorie, stejná pokladna — osm měn a kurz zamčený na 30 minut.