ModMyMods
ModMyMods MOD-0004 1/2" ID 3/4" OD PVC Tubing Clear diy cooling
- Clear
$1,27
0.00001637BTC
Stokta
ModMyMods
ModMyMods MOD-0002 3/8" ID x 1/2" OD Clear PVC Tubing DIY Cooling
Clear PVC tubing with smooth walls for optimal water flow in custom liquid-cooling loops, compatible with compression and barb fittings and sold by the foot
- Color/FinishClear
Color Clear
- Black
- Clear
Üzeri çizili sürümler mevcuttur ancak burada stokta değildir.
- Smooth inner walls reduce flow resistance for efficient cooling
- Flexible PVC connects easily to both compression and barb fittings
- Durable construction resists wear and breakdown over years of use
- Manufactured locally in western New York for quality control
- Sold by the foot so you buy the exact length needed
Tubing for custom water loops
ModMyMods MOD-0002 is clear flexible PVC tubing sized at 3/8 inch inner diameter and 1/2 inch outer diameter. It is sold by the foot so buyers can order the exact length their loop requires. The smooth bore reduces flow restriction and the material works with both compression and barb fittings.
Suits builders assembling a custom liquid-cooling
This tubing fits systems that use 3/8 inch ID and 1/2 inch OD dimensions. It is not intended for loops that require a different inner or outer diameter, nor for builders who need pre-cut lengths or coloured tubing.
Inner and outer diameter
The 3/8 inch ID and 1/2 inch OD determine whether the tubing matches the fittings and components in the loop. Buyers must verify these dimensions against their water blocks, radiators and fittings before ordering.
Öne çıkanlar
- Smooth inner walls reduce flow resistance for efficient cooling
- Flexible PVC connects easily to both compression and barb fittings
- Durable construction resists wear and breakdown over years of use
- Manufactured locally in western New York for quality control
- Sold by the foot so you buy the exact length needed
Teknik özellikler
| Color/Finish | Clear |
|---|---|
| Brand | ModMyMods |
| Model | MOD-0002 |
| Part Number | MOD-0002 |
Bu modelin diğer sürümleri
Aynı seriden 1 tane daha
Aynı aile, farklı bellek, soğutucu veya frekans — karar vermeden önce karşılaştırın.
Bu ürünle ilgili sorular
What inner diameter does the MOD-0002 tubing use for water-cooling loops?
The tubing has a 3/8 inch inner diameter and 1/2 inch outer diameter, so it fits standard 3/8 ID compression or barb fittings.
How much tubing do I receive when I order multiple quantities?
Each quantity equals one continuous foot; ordering five gives a single five-foot length, not five separate one-foot pieces.
How should I cut and fit the tubing to avoid leaks on compression fittings?
Cut the tube square with a sharp blade, slide the compression nut and olive on first, then push the tube fully onto the barb before tightening the nut.
Bu reyondan diğerleri
Müşteriler bunları karşılaştırdı
Aynı raf, aynı sipariş tamamlama — sekiz koin ve 30 dakikalık kur kilidi.
