Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Green PCIe 1x to 4-slot 16x riser card with 60cm USB 3.0 cable

Vszerda

Vszerda PCI-E 1x to 16x Riser Card 1 to 4 Slot USB 3.0 60cm expansion card

SKU CH-JWNQ-JDFZ6

Splits one PCIe 1x slot into four 16x connectors with a 60 cm USB 3.0 cable for multi-GPU mining rigs

  • Expands one PCIe 1x slot into four 16x slots for multi-GPU mining rigs
  • USB 3.0 shielded cable keeps high-speed signals stable inside tight 1U to 3U chassis
  • 60 cm cable length gives flexible GPU placement within the case
  • Supports four high-speed PCIe 16x cards simultaneously from a single lane
  • Dedicated bitcoin mining function targets coin-hashing workloads directly

Four-slot PCI-E riser for mining rigs

This adapter converts a single PCI-E 1x slot into four 16x connectors using a 60 cm USB 3.0 cable. It is designed for cryptocurrency mining systems that need multiple graphics cards from one motherboard slot. The flexible shielded cable fits 1U, 2U and 3U chassis. Each connected card runs at reduced bandwidth because the upstream link remains 1x.

Motherboard slot and power budget check

Verify that your motherboard has at least one free PCI-E 1x or larger slot and that its chipset can enumerate four downstream devices. Confirm the power supply can deliver enough current for all installed graphics cards plus the riser board itself. The 23.63 inch cable length limits how far the cards can sit from the motherboard, so measure your chassis layout before ordering. Builders who need full 16-lane bandwidth per card cannot use this product.

USB 3.0 cable and port multiplier board

The included 60 cm USB 3.0 shielded cable carries the PCI-E signals from the motherboard to the four-slot riser board. No extra cables, brackets or driver discs are supplied. The board simply splits the single upstream lane across four downstream slots, so mining software sees four separate devices. Users who expect plug-and-play gaming performance or hot-plug support will not find those features here.

Põhijooned

  • Expands one PCIe 1x slot into four 16x slots for multi-GPU mining rigs
  • USB 3.0 shielded cable keeps high-speed signals stable inside tight 1U to 3U chassis
  • 60 cm cable length gives flexible GPU placement within the case
  • Supports four high-speed PCIe 16x cards simultaneously from a single lane
  • Dedicated bitcoin mining function targets coin-hashing workloads directly

Tehnilised andmed

Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.

Küsimused selle toote kohta

Does the riser card come with the USB 3.0 cables needed to connect four GPUs?

The listing states No Cable, so the four USB 3.0 shield cables must be purchased separately.

How many graphics cards can this single 1x slot support at once?

The board splits one PCIe 1x connection into four 16x slots, allowing up to four cards to run from the same slot.

What does the 60 cm cable length mean for GPU placement inside a mining frame?

Each USB 3.0 cable reaches roughly 23.63 inches, giving enough slack to space cards across a standard 1U to 3U chassis.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.