Acceptăm criptomonede — astfel, criptomonedele pe care le dețineți pot cumpăra echipamente reale.Plătiți în cripto, cheltuiți-o pe echipamente reale. Livrare asigurată gratuită oriunde în lume peste 399 $. Cartoane neutre, fără marcă, expediate din Germania.Livrare asigurată gratuită peste 399 $. Cursul dumneavoastră este blocat timp de 30 de minute de la deschiderea paginii de plată.Curs blocat 30 de minute. Fiecare articol este sigilat, numărul de serie este verificat, iar produsul este acoperit de o garanție de 24 de luni.Sigilat, garantat 24 de luni.

Produse urmărite Conectare
Green PCIe 1x to 4-slot 16x riser card with 60cm USB 3.0 cable

Vszerda

Vszerda PCI-E 1x to 16x Riser Card 1 to 4 Slot USB 3.0 60cm expansion card

SKU CH-JWNQ-JDFZ6

Splits one PCIe 1x slot into four 16x connectors with a 60 cm USB 3.0 cable for multi-GPU mining rigs

  • Expands one PCIe 1x slot into four 16x slots for multi-GPU mining rigs
  • USB 3.0 shielded cable keeps high-speed signals stable inside tight 1U to 3U chassis
  • 60 cm cable length gives flexible GPU placement within the case
  • Supports four high-speed PCIe 16x cards simultaneously from a single lane
  • Dedicated bitcoin mining function targets coin-hashing workloads directly

Four-slot PCI-E riser for mining rigs

This adapter converts a single PCI-E 1x slot into four 16x connectors using a 60 cm USB 3.0 cable. It is designed for cryptocurrency mining systems that need multiple graphics cards from one motherboard slot. The flexible shielded cable fits 1U, 2U and 3U chassis. Each connected card runs at reduced bandwidth because the upstream link remains 1x.

Motherboard slot and power budget check

Verify that your motherboard has at least one free PCI-E 1x or larger slot and that its chipset can enumerate four downstream devices. Confirm the power supply can deliver enough current for all installed graphics cards plus the riser board itself. The 23.63 inch cable length limits how far the cards can sit from the motherboard, so measure your chassis layout before ordering. Builders who need full 16-lane bandwidth per card cannot use this product.

USB 3.0 cable and port multiplier board

The included 60 cm USB 3.0 shielded cable carries the PCI-E signals from the motherboard to the four-slot riser board. No extra cables, brackets or driver discs are supplied. The board simply splits the single upstream lane across four downstream slots, so mining software sees four separate devices. Users who expect plug-and-play gaming performance or hot-plug support will not find those features here.

Puncte forte

  • Expands one PCIe 1x slot into four 16x slots for multi-GPU mining rigs
  • USB 3.0 shielded cable keeps high-speed signals stable inside tight 1U to 3U chassis
  • 60 cm cable length gives flexible GPU placement within the case
  • Supports four high-speed PCIe 16x cards simultaneously from a single lane
  • Dedicated bitcoin mining function targets coin-hashing workloads directly

Specificații

Nicio specificație publicată pentru acest articol deocamdată.

Întrebări despre acest articol

Does the riser card come with the USB 3.0 cables needed to connect four GPUs?

The listing states No Cable, so the four USB 3.0 shield cables must be purchased separately.

How many graphics cards can this single 1x slot support at once?

The board splits one PCIe 1x connection into four 16x slots, allowing up to four cards to run from the same slot.

What does the 60 cm cable length mean for GPU placement inside a mining frame?

Each USB 3.0 cable reaches roughly 23.63 inches, giving enough slack to space cards across a standard 1U to 3U chassis.

Tot din acest raion

Clienții au comparat și acestea.

Același raion, aceeași finalizare a comenzii — opt monede și un curs blocat 30 de minute.