Western Digital
Western Digital WD Red Plus 6TB 3.5" SATA Laptop Internal Hard Drive
6 TB 3.5" SATA drive built for 24/7 NAS workloads up to 180 TB per year with NASware 3.0 firmware
- 6 TB capacity supports up to 8-bay NAS systems
- 180 TB annual workload rating handles heavy NAS traffic
- NASware 3.0 firmware optimises drive compatibility and integration
- Designed for 24/7 operation in small-to-medium business NAS
- 5-inch SATA form factor fits standard NAS drive bays
WD Red Plus 6TB for NAS
The WD Red Plus 6TB drive is built for small- to medium-business NAS enclosures with up to eight bays. It uses NASware 3.0 firmware to improve compatibility and integration in 24/7 multi-user environments. The SATA interface suits standard NAS controllers without extra adapters.
Upgrading from desktop drives
Desktop drives lack the 180TB per year workload rating and firmware tuning that RAID rebuilds and ZFS arrays demand. The jump is worth it when the NAS runs continuously, serves multiple clients or rebuilds large volumes regularly. Single-drive backups or occasional archives do not need this class.
Fits standard 3.5-inch bays
The 3.5-inch form factor fits hot-swap trays and fixed cages designed for SATA hard drives. NASware 3.0 handles error-recovery timing so the array controller stays in charge. The drive frees the administrator from tuning timeouts or worrying about desktop-drive dropouts during heavy rebuilds.
Põhijooned
- 6 TB capacity supports up to 8-bay NAS systems
- 180 TB annual workload rating handles heavy NAS traffic
- NASware 3.0 firmware optimises drive compatibility and integration
- Designed for 24/7 operation in small-to-medium business NAS
- 5-inch SATA form factor fits standard NAS drive bays
Tehnilised andmed
Selle toote kohta ei ole veel tehnilisi andmeid avaldatud.
Küsimused selle toote kohta
Does the 3.5" drive fit a standard laptop drive bay?
No, a 3.5" SATA drive requires a desktop or NAS chassis with 3.5" bays; most laptops only accept 2.5" drives.
What jumper or BIOS setting is needed for the SATA III interface?
No jumper is required; the drive auto-negotiates SATA 6 Gb/s, but the host controller must be set to AHCI mode for full performance.
When should the drive be replaced under the 180 TB/year workload rating?
Plan replacement once cumulative written data approaches the rated 180 TB per year to stay within the specified workload limit.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
