暗号資産でのお支払いに対応—お手持ちのコインで、本物のハードウェアをご購入いただけます。暗号資産で支払い、本物のハードウェアに使う。 $399以上のご注文で、世界中どこでも送料無料(保険付き)。無地・ノーブランドの外箱で、ドイツから発送いたします。$399以上で送料無料(保険付き)。 注文手続きを開始すると、レートは30分間ロックされます。レートは30分間ロック。 すべての商品は未開封で、シリアル番号を確認した上で、24か月保証が付いています。未開封、24か月保証。

ウォッチリスト ログイン

Western Digital

Western Digital WD Red Plus 6TB 3.5" SATA Laptop Internal Hard Drive

SKU CH-BXC1-7727D

6 TB 3.5" SATA drive built for 24/7 NAS workloads up to 180 TB per year with NASware 3.0 firmware

  • 6 TB capacity supports up to 8-bay NAS systems
  • 180 TB annual workload rating handles heavy NAS traffic
  • NASware 3.0 firmware optimises drive compatibility and integration
  • Designed for 24/7 operation in small-to-medium business NAS
  • 5-inch SATA form factor fits standard NAS drive bays

WD Red Plus 6TB for NAS

The WD Red Plus 6TB drive is built for small- to medium-business NAS enclosures with up to eight bays. It uses NASware 3.0 firmware to improve compatibility and integration in 24/7 multi-user environments. The SATA interface suits standard NAS controllers without extra adapters.

Upgrading from desktop drives

Desktop drives lack the 180TB per year workload rating and firmware tuning that RAID rebuilds and ZFS arrays demand. The jump is worth it when the NAS runs continuously, serves multiple clients or rebuilds large volumes regularly. Single-drive backups or occasional archives do not need this class.

Fits standard 3.5-inch bays

The 3.5-inch form factor fits hot-swap trays and fixed cages designed for SATA hard drives. NASware 3.0 handles error-recovery timing so the array controller stays in charge. The drive frees the administrator from tuning timeouts or worrying about desktop-drive dropouts during heavy rebuilds.

特長

  • 6 TB capacity supports up to 8-bay NAS systems
  • 180 TB annual workload rating handles heavy NAS traffic
  • NASware 3.0 firmware optimises drive compatibility and integration
  • Designed for 24/7 operation in small-to-medium business NAS
  • 5-inch SATA form factor fits standard NAS drive bays

仕様

この商品の仕様はまだ公開されていません。

この商品に関する質問

Does the 3.5" drive fit a standard laptop drive bay?

No, a 3.5" SATA drive requires a desktop or NAS chassis with 3.5" bays; most laptops only accept 2.5" drives.

What jumper or BIOS setting is needed for the SATA III interface?

No jumper is required; the drive auto-negotiates SATA 6 Gb/s, but the host controller must be set to AHCI mode for full performance.

When should the drive be replaced under the 180 TB/year workload rating?

Plan replacement once cumulative written data approaches the rated 180 TB per year to stay within the specified workload limit.

同じ売り場の商品

よく比較されている商品

同じ売り場、同じレジ — 8種類のコインと30分間のレートロック。