Me võtame vastu krüptoraha — nii saab teie hoitav krüptoraha osta päris riistvara.Makske krüptorahaga, kulutage seda päris riistvarale. Tasuta kindlustatud tarne kogu maailmas, üle 399 $. Lihtsad, kaubamärgita väliskarbid, saadetud Saksamaalt.Tasuta kindlustatud tarne üle 399 $. Teie kurss lukustatakse 30 minutiks kohe, kui kassa avaneb.Kurss lukustatud 30 minutiks. Iga toode on pitseeritud, selle seerianumber on kontrollitud ja sellel kehtib 24-kuuline garantii.Pitseeritud, 24-kuulise garantiiga.

Hinnavaatlus Logi sisse
Standard 3.5 inch internal hard drive silver metal casing

Western Digital

Western Digital WD60EFAX 6TB SMR 5400 RPM 256MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-XPK5-ZMNRN MPN WD60EFAX

A 6 TB SMR drive with 256 MB cache built for up to 8-bay NAS systems running 24/7

  • InterfaceSATA 6.0Gb/s
  • Capacity6TB
  • Recording TechnologySMR
  • RPM5400 RPM
  • Cache256MB
  • FeaturesSpecifically designed for use in NAS systems with up to 8 ba
  • Designed for NAS systems with up to 8 bays
  • SATA 6.0Gb/s interface with 256MB cache for data throughput
  • 5400 RPM spindle speed suited for 24x7 operation
  • NASware 3.0 firmware optimises compatibility and reliability
  • Supports 180TB per year workload rate for heavy use

WD Red 6 TB SMR NAS Drive

This 3.5 inch internal hard drive uses SMR recording at 5400 RPM with a 256 MB cache and a SATA 6.0 Gb/s interface. It is built for small and home office NAS enclosures that hold up to eight bays and run continuously. The 6 TB capacity suits users who need bulk storage for backups, media libraries or archives in a RAID array.

NASware 3.0 Firmware and 180 TB Annual Workload

NASware 3.0 firmware optimises compatibility, integration and reliability inside supported NAS appliances. The drive is rated for up to 180 TB per year workload rate, reflecting its design for 24x7 operation. Standard 3.5 inch dimensions allow direct mounting in typical NAS drive trays without adapters.

Replaces Desktop Drives in Multi-Bay NAS

Desktop-class drives lack the firmware tuning and workload rating required for always-on RAID environments. This model upgrades reliability for arrays up to 112 TB total raw capacity across eight bays. The jump is worth it when moving from consumer drives that are not validated for continuous multi-drive operation.

Põhijooned

  • Designed for NAS systems with up to 8 bays
  • SATA 6.0Gb/s interface with 256MB cache for data throughput
  • 5400 RPM spindle speed suited for 24x7 operation
  • NASware 3.0 firmware optimises compatibility and reliability
  • Supports 180TB per year workload rate for heavy use

Tehnilised andmed

BrandWD
SeriesRed
ModelWD60EFAX
InterfaceSATA 6.0Gb/s
Capacity6TB
Recording TechnologySMR
RPM5400 RPM
Cache256MB
FeaturesSpecifically designed for use in NAS systems with up to 8 bays
Supports up to 180 TB/yr workload rate
NASware technology for compatibility
Small and home office NAS systems in a 24x7 environment
UsageFor NAS systems
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.60mm
Length (maximum)147.00mm
Tarnekaal0.70 kg
Pakendi mõõtmed236 × 152 × 76 mm

Küsimused selle toote kohta

What does the SATA 6.0Gb/s interface cap in practice?

The SATA 6.0Gb/s interface caps the theoretical maximum throughput at 6.0Gb/s; real-world sequential speeds are limited by the 5400 RPM platters and SMR recording technology.

What are the physical dimensions required to fit this 3.5" drive?

The drive measures 147.00mm long, 101.60mm wide and 26.10mm high, so the bay or tray must accommodate those maximum dimensions.

How is the drive installed in a NAS, and what step is often missed?

Mount the 3.5" drive in a bay, connect the SATA data and power cables, then ensure the NAS firmware recognises the drive and initialises the RAID volume before storing data.

Veel samast osakonnast

Kliendid võrdlesid neid ka

Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.