Við tökum við rafmynt — svo myntirnar sem þú átt geta keypt alvöru vélbúnað.Greiddu í rafmynt, eyddu henni í alvöru vélbúnað. Frí, tryggð sending um allan heim fyrir pantanir yfir 399 $. Hlutlausir pappakassar án merkinga, sendir frá Þýskalandi.Frí, tryggð sending yfir 399 $. Gengið þitt er læst í 30 mínútur um leið og greiðsluferlið hefst.Gengið læst í 30 mínútur. Hver vara er innsigluð, raðnúmer hennar yfirfarið, og hún nýtur 24 mánaða ábyrgðar.Innsiglað, með 24 mánaða ábyrgð.

Vaktaðar vörur Skrá inn
Standard 3.5 inch internal hard drive silver metal casing

Western Digital

Western Digital WD60EFAX 6TB SMR 5400 RPM 256MB SATA 6.0Gb/s 3.5" internal hard drive

SKU CH-XPK5-ZMNRN MPN WD60EFAX

A 6 TB SMR drive with 256 MB cache built for up to 8-bay NAS systems running 24/7

  • InterfaceSATA 6.0Gb/s
  • Capacity6TB
  • Recording TechnologySMR
  • RPM5400 RPM
  • Cache256MB
  • FeaturesSpecifically designed for use in NAS systems with up to 8 ba
  • Designed for NAS systems with up to 8 bays
  • SATA 6.0Gb/s interface with 256MB cache for data throughput
  • 5400 RPM spindle speed suited for 24x7 operation
  • NASware 3.0 firmware optimises compatibility and reliability
  • Supports 180TB per year workload rate for heavy use

WD Red 6 TB SMR NAS Drive

This 3.5 inch internal hard drive uses SMR recording at 5400 RPM with a 256 MB cache and a SATA 6.0 Gb/s interface. It is built for small and home office NAS enclosures that hold up to eight bays and run continuously. The 6 TB capacity suits users who need bulk storage for backups, media libraries or archives in a RAID array.

NASware 3.0 Firmware and 180 TB Annual Workload

NASware 3.0 firmware optimises compatibility, integration and reliability inside supported NAS appliances. The drive is rated for up to 180 TB per year workload rate, reflecting its design for 24x7 operation. Standard 3.5 inch dimensions allow direct mounting in typical NAS drive trays without adapters.

Replaces Desktop Drives in Multi-Bay NAS

Desktop-class drives lack the firmware tuning and workload rating required for always-on RAID environments. This model upgrades reliability for arrays up to 112 TB total raw capacity across eight bays. The jump is worth it when moving from consumer drives that are not validated for continuous multi-drive operation.

Helstu kostir

  • Designed for NAS systems with up to 8 bays
  • SATA 6.0Gb/s interface with 256MB cache for data throughput
  • 5400 RPM spindle speed suited for 24x7 operation
  • NASware 3.0 firmware optimises compatibility and reliability
  • Supports 180TB per year workload rate for heavy use

Tæknilýsing

BrandWD
SeriesRed
ModelWD60EFAX
InterfaceSATA 6.0Gb/s
Capacity6TB
Recording TechnologySMR
RPM5400 RPM
Cache256MB
FeaturesSpecifically designed for use in NAS systems with up to 8 bays
Supports up to 180 TB/yr workload rate
NASware technology for compatibility
Small and home office NAS systems in a 24x7 environment
UsageFor NAS systems
Form Factor3.5"
Height (maximum)26.10mm
Width (maximum)101.60mm
Length (maximum)147.00mm
Sendingarþyngd0.70 kg
Stærð sendingar236 × 152 × 76 mm

Spurningar um þessa vöru

What does the SATA 6.0Gb/s interface cap in practice?

The SATA 6.0Gb/s interface caps the theoretical maximum throughput at 6.0Gb/s; real-world sequential speeds are limited by the 5400 RPM platters and SMR recording technology.

What are the physical dimensions required to fit this 3.5" drive?

The drive measures 147.00mm long, 101.60mm wide and 26.10mm high, so the bay or tray must accommodate those maximum dimensions.

How is the drive installed in a NAS, and what step is often missed?

Mount the 3.5" drive in a bay, connect the SATA data and power cables, then ensure the NAS firmware recognises the drive and initialises the RAID volume before storing data.

Einnig í þessum vöruflokki

Fólk bar þetta saman

Sama hilla, sama greiðsluferli — átta myntir og 30 mínútna gengislæsing.