XPG
XPG GAMMIX S60 Blade AGAMMIXS60-2T-CS internal SSD
M.2 2280 2TB drive with PCIe Gen4 x4 interface and NVMe 1.4 protocol, delivering up to 5000 MB/s read and 4200 MB/s write on PC or 4600 MB/s read on PS5
- Used ForConsumer
- Form FactorM.2 2280
- Capacity2TB
- Memory Components3D NAND
- InterfacePCIe Gen4 x4
- ProtocolNVMe 1.4
Options 2TB
- 2TB
- 1TB
- Fast PS5 load times with read speeds up to 4,600MB/s
- High PC throughput reaching 5,000MB/s sequential read
- Large 2TB capacity stores extensive game libraries
- Reliable operation backed by 1,500,000 hours MTBF
- Durable design withstands 1500G shock resistance
2TB NVMe drive for consumers
The XPG GAMMIX S60 Blade is an M.2 2280 internal SSD built with 3D NAND for consumer workloads. It connects through a PCIe Gen4 x4 interface and follows the NVMe 1.4 protocol. The 2TB capacity targets gaming PCs, laptops and the PS5 console.
Sustained load behaviour
Sequential reads reach up to 5,000 MBps on PC and 4,600 MBps on PS5, while writes peak at 4,200 MBps. SLC caching and a host memory buffer absorb burst traffic before the native 3D NAND settles into steady-state throughput. An MTBF of 1,500,000 hours and 1500G shock resistance indicate durability during prolonged use.
PCIe Gen4 x4 practical limits
The four-lane Gen4 link caps real-world bandwidth near the quoted sequential ceilings, so heavier queues or mixed workloads will not exceed those figures. Operating temperature is rated 0°C to 70°C, with storage tolerance from -40°C to 85°C. Advanced LDPC ECC corrects errors that appear as the NAND ages within these thermal bounds.
Põhijooned
- Fast PS5 load times with read speeds up to 4,600MB/s
- High PC throughput reaching 5,000MB/s sequential read
- Large 2TB capacity stores extensive game libraries
- Reliable operation backed by 1,500,000 hours MTBF
- Durable design withstands 1500G shock resistance
Tehnilised andmed
| Brand | XPG |
|---|---|
| Series | GAMMIX S60 Blade |
| Used For | Consumer |
| Form Factor | M.2 2280 |
| Capacity | 2TB |
| Memory Components | 3D NAND |
| Interface | PCIe Gen4 x4 |
| Protocol | NVMe 1.4 |
| Max Sequential Read | Read speed up to 4,600MB/s (PS5) |
| Max Sequential Write | Up to 4200 MBps |
| MTBF | 1,500,000 hours |
| Operating Temperature | 0°C ~ +70°C |
| Storage Temperature | -40°C ~ +85°C |
| Max Shock Resistance | 1500G |
| Tarnekaal | 0.02 kg |
| Pakendi mõõtmed | 128 × 102 × 16 mm |
Selle mudeli teised versioonid
1 veel samast sarjast
Sama seeria, erinev mälumaht, jahutus või taktsagedus — võrrelge enne otsustamist.
Küsimused selle toote kohta
Does the 2 TB GAMMIX S60 Blade run hot inside a PS5 during long sessions?
It operates between 0 °C and 70 °C and the PS5 read speed is rated at 4,600 MB/s, so sustained use stays within the specified thermal envelope.
What motherboard slot is required for the M.2 2280 PCIe Gen4 x4 interface?
An M.2 2280 key-M slot wired for PCIe 4.0 x4 and NVMe 1.4 support is needed for full performance.
Will the drive work with a PCIe 3.0 motherboard I already own?
Yes, the NVMe 1.4 controller is backward compatible and will run at PCIe 3.0 speeds on older platforms.
Veel samast osakonnast
Kliendid võrdlesid neid ka
Sama osakond, sama kassa — kaheksa krüptovaluutat ja 30-minutiline kursilukk.
